Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
2000 BMW 323Ci Base Convertible
 
BMW Home > 2000 BMW 323Ci Base Convertible > Suspension & SteeringSuspension Upgrades & Performance 

Suspension Upgrades & Performance

- Page 6

KW Coilover Suspension Kits

When it comes to sporty suspension systems for every use, KW Automotive GmbH is one of the leading providers world-wide today. Rely on the extensive suspension knowledge and experience of the KW Automotive group to supply you with the best in handling and performance.
KW Variant 1
The ideal system for customers wishing to rely on the experience of KW's engineers to set the damper setting, yet determine their own degree of lowering. In extensive driving tests their engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.
  • Optimally pre-set
  • Sporty harmonious damping technology
  • Stainless steel technology "inox-line"
  • Individually height-adjustable
  • Lowering range approved by the German Technical Control Board (TÜV)
  • Fully finished complete solutions
  • High-quality component parts for long durability
KW Variant 1 With Pre-Set Dampening Note: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); Lowering adjustment ranges in inches - Front: 1.5-2.9 Rear: 1.2-2.3; When using original tires, wheel offset spacers may be required  
 
[ More Info ]

Note: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); Lowering adjustment ranges in inches - Front: 1.5-2.9 Rear: 1.2-2.3; When using original tires, wheel offset spacers may be required

$1449.99
KW Variant 2
This system intended for the experienced driver who does not only wish to determine the individual lowering of his vehicle, but also wishes to carry out setup adjustments. The adjustable rebound damper allows adjusting the pitch and roll behavior of the vehicle and therefore the driving pleasure can be adapted to the own requirements.
  • Damping technology with individually adjustable rebound
  • "inox-line" stainless steel technology
  • Individually height adjustable
  • Adjustment parameters approved by the German Technical Control Board (TÜV)
  • Fully finished complete solution
  • High-quality components for long durability
  • Comprehensive documentation for easy use
KW Coilover Kit Variant 2 with Adjustable Rebound Dampening Note: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); Lowering adjustment ranges in inches - Front: 1.5-2.9 Rear: 1.2-2.3; When using original tires, wheel offset spacers may be required  
 
[ More Info ]

Note: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); Lowering adjustment ranges in inches - Front: 1.5-2.9 Rear: 1.2-2.3; When using original tires, wheel offset spacers may be required

$1869.99
KW Variant 3
State-of-the-art technology from motor sports for more performance on the road. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
  • Damping technology with individually adjustable rebound- and compression technology
  • "inox-line" stainless steel technology
  • Individually height adjustable
  • Adjustment parameters approved by the German Technical Control Board (TÜV)
  • High-quality components for long durability
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Comprehensive documentation for easy use
KW coilover Kit Variant 3 with Adjustable Rebound & Compression Dampening Note: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); Lowering adjustment ranges in inches - Front: 1.5-2.9 Rear: 1.2-2.3; When using original tires, wheel offset spacers may be required  
 
[ More Info ]

Note: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); Lowering adjustment ranges in inches - Front: 1.5-2.9 Rear: 1.2-2.3; When using original tires, wheel offset spacers may be required

$2429.99

ST Suspension Kits

The insight and German engineering that go into shaping each ST component are centered around achieving a telepathic bond between man and machine.
A balance of exceptional strength and performance for vehicles with precision handling and control for drivers.
Respected in the insustry for solid design, ST Suspensions offer the versatility to adapt to both the street of the meanest of tracks.
It is the result of rigorous testing and detail that ensures all levels of performance are met, and expectations for a superior driving experience are well surpassed.
ST X Coilover Kits
Need to get low? ST coilovers feature a continuous thread construction for height adjustment from moderate to extreme! Each coilover is manufactured by KW Automotive and their expertise and know how ensures maximum quality and fantastic driving dynamics.
Once installed, the ST X coilover can be easily adjusted using a polyamide ring on the galvanized, multiple-sealed strut. Adjustment is different for each car, but typically you can expect between 35 and 65mm of lowering on both the front and rear axles.
Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car's bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Lowering with Style: The ST X coilovers:
  • Individual lowering within the TUV-tested adjustment range.
  • Front and rear axle thread adjustment (when possible).
  • Galvanized coilover struts with additional coating for optimized corrosion protection.
  • Complete solution with adjustable spring plate, race spring system and bumpers with dust protection.
  • Powerful twin-tube dampers with high-quality components for maximum longevity.
ST Suspensions ST X Coilover Kit, Height Adjustable Note: Height adjustable front and rear axles Lowering adjustment ranges in inches - Front: 1.2"-2.8" Rear: 1.2"-2.0"; In combination with the original wheel and tires, wheel spacers might need to be used.  
 
[ More Info ]

Note: Height adjustable front and rear axles Lowering adjustment ranges in inches - Front: 1.2"-2.8" Rear: 1.2"-2.0"; In combination with the original wheel and tires, wheel spacers might need to be used.

$1019.99
ST XTA Coilover Kits
For those who demand the absolute best performance comes the ST XTA coilover. The full driving behavior of your car can be adjusted using KW damper technology along with an adjustable aluminum uni-ball top mount for fine-tuning of the camber and caster!
Performance driving in mind
ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions. This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly. If the rebound force is increased, the car will drive with even more track stability and further reduced bodyroll. If the rebound force is decreased, the car will feel more comfortable when on the move. For increased performance, the ST XTA features an aluminum adjustable topmount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.
Easy lowering adjustment
Like all ST coilovers the lowering adjustment is made via a continuous thread on the galvanized strut. This even allows the lowering to be made even when the kit is installed by turning the spring plate higher or lower! NOTE: The lowering of each vehicle differs greatly with ST XTA coilovers due to the type of construction.
KW Engineering: Exclusive for ST suspension
The high-quality ST XTA coilover is based on the twin-tube damping principle of low friction combined with pressure-resistant damper housings. Manufactured directly at KW, a mono block guide and seal package reduces the friction of the damper as well as protecting it against corrosion and dirt. Each galvanized strut is sealed multiple times to ensure maximum longevity in ALL weather conditions.
  • Latest damping technology for maximum longevity
  • Reduced system friction for effective damping adjustment
  • Individual lowering within the TUV-tested adjustment range
  • Front and rear axle (when possible) with thread adjustment
  • Galvanized coilover struts with additional coating for an optimized corrosion protection
  • Complete solution with adjustable spring plate, race spring system and bumpers with dust protection
  • Aluminum adjustable uni-ball top mounts (when possible)
  • Scaled camber adjustment (optionally also caster)
  • Externally adjustable damping
ST Suspension XTA Coilover Kit, Height and Dampening Adjustable Note: Height adjustable front and rear axles Lowering adjustment ranges in inches - Front: 1.2"-2.8" Rear: 1.2"-2.0"; In combination with the original wheel and tires, wheel spacers might need to be used. Because of the design of this specific car, the damping adjustment can only be made when the damper is not mounted. By modifying the interior trim, this problem can be avoided.  
 
[ More Info ]

Note: Height adjustable front and rear axles Lowering adjustment ranges in inches - Front: 1.2"-2.8" Rear: 1.2"-2.0"; In combination with the original wheel and tires, wheel spacers might need to be used. Because of the design of this specific car, the damping adjustment can only be made when the damper is not mounted. By modifying the interior trim, this problem can be avoided.

$1444.99
ST Sport Lowering Kits
By combining the ST Sport Springs and ST Sport Shocks you get the best of all worlds and take the guess work out of suspension tuning, getting it done right the first time.
ST Sport Springs are specifically engineered for optimal performance and comfort. Improve your ride with ST Suspension Sport Springs to lower the center of gravity, reduce body roll in corners, and limit weight transfer under acceleration.
ST Sport Shocks are designed exclusively for lowered vehicles featuring advanced valve tuning targeted at controlling the higher spring rates associated with performance lowering spring. Shortened or reduced rebound travel optimizes the piston stroke of the shock absorber guaranteeing a balanced chassis under any circumstances.
ST Anti-Sway Bars
Reduce vehicle body roll and increase the traction and gripping power of your tires with a set of ST Anti-Sway Bars. Precision engineered to provide the best performance possible, their cold formed solid steel design is powder coated for durability and comes complete with polyurethane bushings and all hardware needed for easy installation.

BMW Home  >  2000 BMW 323Ci Base Convertible > Suspension & Steering  >  Suspension Upgrades & Performance 

  Page 6 of 9  <123456789>


Browse Suspension Upgrades & Performance for all 3-Series E46 (1999-2006) vehicles

Page last updated: Tue 11/21/2017 11:10:49 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window