Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1978 BMW 320i Base Coupe
 
BMW Home > 1978 BMW 320i Base Coupe > Suspension & SteeringAxles, Bearings & Differential 

Axles, Bearings & Differential

- Page 1

Axle Shaft Assemblies and Parts


Carrier Bearing - Differential Output Shaft (Rear)

Shaft Seal - Differential Output Shaft (54 X 38 X 10 mm)

CV Joints

If you are hearing a "clicking" or "clunking" sound coming from under your car there is a good chance your CV joints are starting to go bad. CV (constant velocity) joints are responsible for providing a direct link between the axles and the wheels. They allow the power to be distributed evenly throughout varying degrees of rotation and can fail. One of things you can do to prevent their failure is to inspect the boots that cover the joints and make sure they are not ripped or torn. CV joints should be disassembled, inspected and repacked in the appropriate grease as needed.
CV Joint Grease
Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. Each contains enough grease to effectively one CV joint from completely dry.

Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. Each contains enough grease to effectively one CV joint from completely dry.
CV Joint Removal Tool
Axle Boot Clamp Pliers - 3/8" Drive  
 
[ More Info ]

Note: For installation of crimp-type axle boot clamps, Ergonomic 2-component handle. 178 mm length.

Hazet
Brand Rating
$204.00
Axle Boot Clamp Pliers  
[ More Info ]

Note: With lug holding-down device, Nickel Plated, 230 mm length.

Hazet
Brand Rating
$102.75
Axle Boot Clamp Pliers - 3/8" Drive  
 
[ More Info ]

Note: For installation of crimp-type axle boot clamps.

Assenmacher Tools (AST)
Brand Rating
$82.75

CV Joint Parts

If you are hearing a "clicking" or "clunking" sound coming from under your car there is a good chance your CV joints are starting to go bad. CV (constant velocity) joints are responsible for providing a direct link between the axles and the wheels. They allow the power to be distributed evenly throughout varying degrees of rotation and can fail. One of things you can do to prevent their failure is to inspect the boots that cover the joints and make sure they are not ripped or torn. CV joints should be disassembled, inspected and repacked in the appropriate grease as needed. Pelican offers all the parts necessary to rebuild your constant velocity joints.
Axle Boot Kit for C/V Joint (Rear Left Inner, Left or Right Rear Outer Rear Right Inner,)
BMW Home  >  1978 BMW 320i Base Coupe > Suspension & Steering  >  Axles, Bearings & Differential 

  Page 1 of 5  12345>


Browse Axles, Bearings & Differential for all 3-Series E21 (1977-1983) vehicles

Page last updated: Wed 12/13/2017 12:44:56 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window