Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1982 BMW 320i Base Coupe
 
BMW Home > 1982 BMW 320i Base Coupe > Transmission & ClutchClutch & Flywheel  

Clutch & Flywheel

- Page 1

Clutch Super Kits

Clutch Super Kits for E21
In this kit, you get everything you need to replace your clutch all at once. If you are spending the time and effort to pull your engine out of your car, you might as well make sure that you are replacing and fixing every piece that might need attention, while you have access to it. Here's what the kit includes:
  • Three piece Sachs clutch kit
  • New bolts for flywheel and clutch pressure plate
  • New crankshaft rear seal (aka flywheel seal)
  • New transmission Input Shaft seal
  • New pilot bearing and seals
  • New release bearing spring clip
  • New clutch pivot pin
  • New slave cylinder
  • New exhaust gaskets
  • New slave cylinder hose
If you don't already own one, you will also need the flywheel pilot bearing puller tool for removing the flywheel pilot bearing. You will also need the clutch alignment tool if you don't already own one.

NOTE: Flywheels are not included with these kits. If your old flywheel is worn beyond its re-surfacing limit, it should be replaced with a new one available below.

Clutch Kits

This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly.
Clutch Kit
Clutch Kit  
 
[ More Info ]

Note: Contains: (1) Disc (1) Pressure Plate (1) Release Bearing,

Sachs
Brand Rating
$205.00

Clutch Discs

Clutch disks transfer the energy from the engines flywheel to the transmission. If your transmission is slipping or you hear grinding noises you are probably in need of a new clutch. Clutches and pressure plates should always be changed as a group.


Clutch Disc (228 mm)

Clutch Tools

Pressure Adaptor needed for pressuring the master cylinder or clutch slave cylinder reservoirs. Used in conjunction with a pressure bleeder. Comes with a 1/4-18 NPT threaded opening. Applicable to most European models.

Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm.

These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16.

Clutch Disc Spline Grease

Clutch Disc Spline Grease - SACHS High Performance (80 gram Tube)  
[ More Info ]

Note: Used to lubricate the clutch disc splines and manual trans input shaft splines.

Sachs
Brand Rating
$7.25

Flywheels and Parts

BMW Home  >  1982 BMW 320i Base Coupe > Transmission & Clutch  >  Clutch & Flywheel  

  Page 1 of 4  1234>


Browse Clutch & Flywheel for all 3-Series E21 (1977-1983) vehicles

Page last updated: Mon 11/13/2017 12:26:36 PM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window