Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1999 BMW 318ti Base Hatchback
 
BMW Home > 1999 BMW 318ti Base Hatchback > EngineCylinder Head & Valvetrain 

Cylinder Head & Valvetrain

- Page 2

Head Gasket and Bolt Kit
The Head Gasket and Bolt Kit includes the head bolt set, head gasket set, and Kimwipes.

Intake / Exhaust Gaskets

In this section you will find the gaskets that seal the intake manifold to the cylinder head. Replace them whenever you remove any intake components. Good intake gaskets are crucial for proper running of your car. If you have leaks, it can cause the car to run improperly, and possibly cause engine damage. Also included are the gaskets that seal the exhaust manifolds to the cylinder head. Replace them whenever you remove any exhaust components. Keeping your exhaust components sealed is vital to keep your car running correctly.
Exhaust Manifold Gasket - Manifold to Cylinder Head

Gasket - Air Intake Tube to Exhaust Manifold

Exhaust Manifold Gasket to Catalyzer Pipe

Intake Manifold Gasket - Between Upper and Lower Manifolds

Intake Manifold Gasket - Intake Manifold to Cylinder Head
Intake Manifold Resealing Kits
The Intake Manifold Resealing Kits include the rubber intake boot and intake manifold gaskets.

Valves and Guides

A critical part of any head rebuild is new OEM intake and exhaust valves. Many times valves can be reground and reused, however if your valves are too worn to be re-used, Pelican can supply you with the needed parts for your rebuild. Valve Guides act to provide valves with proper lubrication while your engine is running. Any head rebuild should include new Valve Guides. Whenever you replace the valve guides, be sure to check the size of the original valve guide before ordering.
Intake Valve (33.0 mm) (6 mm Stem)
Intake Valve (33.0 mm) (6 mm Stem)  
 
[ More Info ]

  (8 per car, sold individually)
Note: 33mm/6mm Shaft

TRW
Brand Rating
$12.25


Exhaust Valve (30.5 mm) (6 mm Stem)


Valve Guide  
 
[ More Info ]

  (16 per car, sold individually)
Note: for 6mm Valve Stem

Technovance
Brand Rating
$6.25

Valve Guide - Intake/Exhaust 1st Replacement (12.56 X 6.00 mm)  
 
[ More Info ]

  (16 per car, sold individually)
Note: Check size of original valve guide before ordering,

Canyon
Brand Rating
$5.50

Valve Guide - Intake/Exhaust 1st Replacement (12.73 X 6.00 mm)  
[ More Info ]

  (16 per car, sold individually)
Note: Check size of original valve guide before ordering,

Canyon
Brand Rating
$5.75
BMW Home  >  1999 BMW 318ti Base Hatchback > Engine  >  Cylinder Head & Valvetrain 

  Page 2 of 4  <1234>


Browse Cylinder Head & Valvetrain for all 3-Series E36 (1992-1999) vehicles

Page last updated: Wed 12/13/2017 12:50:50 AM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window