Don't let your pads become frozen to your calipers, especially if you drive in all seasons. Caliper assembly lube assists in the brake pads not becoming corroded or frozen to the pistons in the caliper. Use only as directed.
Note: Used to coat the brake disc to prevent noise and squealing, Will call, delivery, or ground shipment only.~Item cannot be shipped by air. Alert: This part contains hazardous or explosive materials and cannot be shipped (local pickup only).
Note: Forms a water resistant, high temperature film that absorbs noise while quieting squeaks and squeals. Specially formulated to dampen the vibrations that cause brake noise. For use on brake pad backing plates and contact points.
Note: Prevents brake noises before they occur. Metallic-bonding formula fills grooves and imperfections in the friction surface that commonly cause squeaks and squeals. For use on new, old or turned brake rotors and drums. Safe for use on all types of brake systems, including ABS.
Note: Synthetic, dry-film, ceramic fortified silicone lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temperature ranges from -50 to 3000 deg. F. Protects against uneven pad wear.
The latest innovation in bleeding your brakes! With Speed Bleeders, you can now truly make bleeding your brakes a fast and easy one person operation. Once installed, these Speed Bleeders become a permanent part of your brake system. 2 Bleeder Valves per package.
Bleed Valve Screw for Brake Caliper (Front/Rear, Left or Right)
Speed Bleeders are the latest innovation in bleeding your brakes! Speed Bleeders use a check valve built into the unit to allow both air and fluid in the brake system to flow only one way, preventing it from re-entering the system. Once installed, bleeding your brakes becomes a one-man operation. Each package includes 2 bleeders.
Brake fluid is a hydraulic fluid specially formulated to withstand the extreme pressures and temperatures of your braking system. Brake fluid should be changed every time you service your brakes. Different brake systems require different brake fluid formulations. Check your owner's manual for your vehicle's particular brake fluid specifications.
Note: Exceeds DOT 4 specifications. Dry Boiling Point: 280 deg. C (536 deg. F). Wet Boiling Point: 198 deg. C (388 deg. F). Be sure to check your owners' manual to confirm that your vehicle requires DOT 4 fluid.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.