Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1996 BMW 318i Base Convertible
 
BMW Home > 1996 BMW 318i Base Convertible > EngineEngine Tools 

Engine Tools

- Page 3

Valve Spring Compressors

Valve Spring Compressor Protective Cover - Cylinder Head Saver  
 
[ More Info ]

Note: Black Delrin protective cover that clips onto valve spring compressor tools. Provides protection against contact with cylinder head and sharp edges of the spring compressor. Fits most spring compressor types.

AGA
Brand Rating
$39.50

With this latest evolution to our Universal Valve Spring Tool we have added the ability to actuate the compression tube even in tight confined locations like under the cowl where the lever cannot be moved or may not even fit. By adding the ability to separate the lever from the compression tube anywhere along the bar you can compress the springs that are confined by brake boosters, AC housings or other factors by locating the lever along the bar where there is open space.

  • Access to valves in areas that are not in open areas with engine in vehicle
  • Valve springs can be depressed "remotely", depressor bar and compression tube are separate
  • Complete universal kit with multi adjustable points
  • No need to remove engine due to confined areas saving time
  • No other valve spring compressor is as universal and adjustable
  • Depressor tube slides easily to each valve location without changing settings
  • All components store neatly in a blow molded box

Dial Indicators

Dial Indicator Gauge  
 
[ More Info ]

Note: 0.01 mm scale graduation. 8 mm measuring range. 1 mm needle rotation. Rotary and lockable scale. 8 mm clamping shaft.

Hazet
Brand Rating
$70.25

0-10MM travel. Measures in 100ths of a millimeter. All steel and brass construction. Resettable pointers. Use with any standard holder.

Valve Keeper Tools

Valve Keeper Tool  
 
[ More Info ]

Note: Used to easily install valve keepers on intake/exhaust valves. For most engines with 6 mm intake/exhaust valve stems, except the BMW N62 and N63 V8 engines,

AGA
Brand Rating
$199.25

Flywheel Locks

Top Dead Center Flywheel Locking Pin  
 
[ More Info ]

Note: For BMW engines M21, M42, M44, M50, M52, M52TU, M54, M56, M57, M60, M62, M62TU, M70, M73, S50, S52, S54 and S62,

Assenmacher Tools (AST)
Brand Rating
$54.25

Leakdown Testers

  • New design incorporates a round, anodized body with permanent laser etching for a sleeker appearance
  • New industrial interchange quick coupler allows use with most standard compression test adapters on the market (some adapters require removal of the valve core)
  • New larger, easier to read leakage gauge has one multi-colored band for measuring low, moderate and high leakage, and a scale range from 0-100% with a redesigned gauge boot for added protection
  • Pressure gauge has a dual scale dial with ranges from 0-100 psi and 0-7 BAR with a redesigned gauge boot for added protection
  • 2 gauge design allows for monitoring of input air-line pressure to ensure accurate testing
  • Easy to use regulator allows for precise control of input air pressure
  • Helps to pin-point problems indicated by a compression test or cylinder balance test
  • Uses shop air to determine leakage source & the amount of leakage measured in percentage of loss
  • Reducer adapter allows use of any 1/4" male quick connect plug

Compression Testers

Engine Compression Tester Kit  
 
[ More Info ]

Note: Designed for complete compression testing on gasoline engines, including domestic, imports, motorcycles, marine and small engines. Unique problem solving features for today's limited space engine compartments, Corrosion resistant nickel plated finish. Adapters work on both flat and tapered seat plugs. Professional quality gauge with zero adjust feature. Extra long 25" flex hose gauge assembly with quick coupler. 2-1/2" gauge features chrome bezel and rugged protective outer boot. Dual scale gauge reads 0-300 psi and 0-2100 kPa, Includes: (Qty.) (1) 12" Flex-14 mm Standard Reach Hose, (1) 12" Flex-14 mm Long Reach Hose, (1) 10 mm Adapter, (1) 12 mm Adapter, (1) 18 mm Adapter, (1) Repair Parts Kit, (1) Blow Molded Hard Case.

OTC
$77.00

Oil System Tools

Engine Oil Pressure Tester Kit  
 
[ More Info ]

Note: Professional kit can be used for domestic and import applications. High and low pressure gauges for both transmission and engine work. Comes complete with adapters for most applications. Designed to be used for both static and on-road testing, Large 3-1/2" gauges feature a chrome bezel and rugged protective outer boot. High pressure gauge reads 0-400 psi and 0-2800 kPa. Low pressure gauge reads 0-100 psi and 0-700 kPa. Both gauges include rear hook to allow gauge to be hung conveniently out of the way. Gauges and hose assembly incorporate quick couplers for easy disconnect. Includes 13 adapters, detailed instruction manual and blow molded hard case with removable lid.

OTC
$87.50

Timing Chain Tools

BMW Home  >  1996 BMW 318i Base Convertible > Engine  >  Engine Tools 

  Page 3 of 6  <123456>


Browse Engine Tools for all 3-Series E36 (1992-1999) vehicles

Page last updated: Mon 11/13/2017 11:57:13 AM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window