Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1992 BMW 318i Base Sedan
 
BMW Home > 1992 BMW 318i Base Sedan > Suspension & SteeringSuspension Wizard 

Suspension Wizard

- Page 2

Suspension Overhaul Tools

You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes with the right tool. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it!
Ball Joint Tools
Ball Joint Tool Kit  
 
[ More Info ]

Note: Used to remove and install the front lower outer ball joint in the control arm. For BMW chassis E30 and E36,

Baum Tools
Brand Rating
$327.75

Ball Joint Tool Kit  
 
[ More Info ]

Note: Used to remove and install the front lower inner ball joint in the control arm. For BMW chassis E30 and E36, All clearance sales are final; no returns allowed.

Baum Tools
Brand Rating
$315.00
Rear Wheel Bearing Extractor and Installer Kit
If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one master kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier.

Rear Trailing Arm Master Kit
Combines 3 OE Tools for On the Car Removal and Installation of the 3 Bushings Located in the Main Rear Trailing Arms. Includes Case. (See below for Specific Bushings and Models)

Bushing (A) 33-32-6-771-828 Lower, outer Bushing
Bushing (B) 33-32-6-770-786 Front of Trailing Arm
Bushing (C) 33-32-6-775-551 Upper, outer Bushing
Press Arbor Kit/Outer Ball Joint
Designed for the proper removal and installation of the outer ball joints. Comes complete with all the components to perfectly mate up to the factory ball joints. Must be used in conjunction with a hydraulic press.
Press Arbor Kit/Inner Ball Joint
Designed for the proper removal and installation of the inner ball joints. Used in conjunction with a hydraulic press, or on the car application when used in conjunction with a C-Clamp.
Ball Joint Installation Tools
Mueller-Kueps' Press and Pull Sleeve kit is a universal tool set for extracting and mounting the following: Silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing bushes, etc.
Ideal for various vehicles, due to universal application.
Sleeves inner diameter from 34 - 72 mm

Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots.

Designed for the proper disassembly of ball joints on drag links and tie rods. Base of opening is 21.5mm

Designed for the proper disassembly of ball joints from lower wishbone. Base of opening is 25.5mm
BMW Home  >  1992 BMW 318i Base Sedan > Suspension & Steering  >  Suspension Wizard 

  Page 2 of 3  <123>


Browse Suspension Wizard for all 3-Series E36 (1992-1999) vehicles

Page last updated: Tue 12/5/2017 11:14:21 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window