Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1991 BMW 318i Base Convertible
 
BMW Home > 1991 BMW 318i Base Convertible > EngineCylinder Head & Valvetrain 

Cylinder Head & Valvetrain

- Page 3

Valves and Guides

A critical part of any head rebuild is new OEM intake and exhaust valves. Many times valves can be reground and reused, however if your valves are too worn to be re-used, Pelican can supply you with the needed parts for your rebuild. Valve Guides act to provide valves with proper lubrication while your engine is running. Any head rebuild should include new Valve Guides. Whenever you replace the valve guides, be sure to check the size of the original valve guide before ordering.
Intake Valve (33.0 mm) (7 mm Stem)
Intake Valve (33.0 mm) (7 mm Stem)  
 
[ More Info ]

  (8 per car, sold individually)
Note: 33/6.97mm Shaft

TRW
Brand Rating
$13.50

Exhaust Valve (30.5 mm) (7 mm Stem)
Exhaust Valve (30.5 mm) (7 mm Stem)  
 
[ More Info ]

  (8 per car, sold individually)
Note: from 2/91

Intervalves
Brand Rating
$20.50

Exhaust Valve
Exhaust Valve  
 
[ More Info ]

  (8 per car, sold individually)
Note: 30.5mm/7mm Shaft, From 2/91 Thru 9/91

KS
Brand Rating
$27.00


Valve Guide  
 
[ More Info ]

  (16 per car, sold individually)
Note: Check guide size before ordering part measures .492 inch or 12.5mm O.D., for 7mm Valve Stem

Technovance
Brand Rating
$6.50

Valve Stem Seals
Valve Stem Seal Kit
Valve Stem Seal Kit  
 
[ More Info ]

  (2 per car, sold individually)
Note: 7mm Stem

Reinz
Brand Rating
$0.75
Intake Valve Cleaner
Intake Valve Cleaner - CRC GDI IVD Intake Valve Cleaner (11 oz. Aerosol Can)  
 
[ More Info ]

Note: Delivers concentrated advanced Cozol technology directly to the backs of intake valves. Dissolves baked-on carbon deposits, improves MPG, increases power and reduces rough idle. Effective for use on gasoline direct injection and port fuel injection engines. Easy to use - spray past the air mass sensor through the air intake.
Alert: This part contains hazardous or explosive materials and cannot be shipped (local pickup only).

CRC Industries
Brand Rating
$15.00

Valve Springs

Valve springs are used to provide constant tension on the valves. Without them, the valves would make contact with the tops of the pistons and cause damage. It's a good idea to have your old valve springs checked by your machine shop to make sure that they have the correct spring tension. If they do not meet the correct specifications, you should replace them with new ones.
Valve Keeper for 7 mm Valve Stems
Valve Spring Compressors
Valve Spring Compressor Protective Cover - Cylinder Head Saver  
 
[ More Info ]

Note: Black Delrin protective cover that clips onto valve spring compressor tools. Provides protection against contact with cylinder head and sharp edges of the spring compressor. Fits most spring compressor types.

AGA
Brand Rating
$39.50

With this latest evolution to our Universal Valve Spring Tool we have added the ability to actuate the compression tube even in tight confined locations like under the cowl where the lever cannot be moved or may not even fit. By adding the ability to separate the lever from the compression tube anywhere along the bar you can compress the springs that are confined by brake boosters, AC housings or other factors by locating the lever along the bar where there is open space.

  • Access to valves in areas that are not in open areas with engine in vehicle
  • Valve springs can be depressed "remotely", depressor bar and compression tube are separate
  • Complete universal kit with multi adjustable points
  • No need to remove engine due to confined areas saving time
  • No other valve spring compressor is as universal and adjustable
  • Depressor tube slides easily to each valve location without changing settings
  • All components store neatly in a blow molded box
BMW Home  >  1991 BMW 318i Base Convertible > Engine  >  Cylinder Head & Valvetrain 

  Page 3 of 4  <1234>


Browse Cylinder Head & Valvetrain for all 3-Series E30 (1983-1991) vehicles

Page last updated: Tue 12/5/2017 11:52:30 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window