Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1991 BMW 318i Base Sedan
 
BMW Home > 1991 BMW 318i Base Sedan > ExhaustExhaust Pipes, Manifolds & EGR  

Exhaust Pipes, Manifolds & EGR

- Page 2

Exhaust Headers

Turner Motorsport Headers
Doing an M50/S50 engine conversion in a 1984-1991 E30 3 Series? Then you'll probably want these. These "shorty" style headers are specifically designed to fit the tight clearance issues of an E30 with an M50-family 24v engine swap. This set fits M50/S50 and M52/S52 WITHOUT an air pump. A TMS developed part, these "shorty style" performance Headers are 100% stainless steel and 2-stage ceramic coated and were CAD designed to be equal length and flow with equal pressure. Bolt these on to your M50 converted E30 3 series for a instant 12lb ft torque and a 9 HP increase (more on modified engines.) These headers were designed to increase mid range power. Stainless steel construction retains heat much better than the competitor's mild steel construction, resulting in increased exhaust velocity. If you want the best shorty header on the market, this is the one. Best of all, these are purpose made specifically for E30's with the M50 / S50 engine conversion.
MSDS Header Systems
Are you looking for a great way to boost the power of your E30? We here at Pelican are pleased to now carry MSDS Header systems for your E30. Why headers? The key to making power in any engine is to make intake and exhaust gases flow quickly and efficiently. The stock exhaust manifolds on the E30 do a good enough job of allowing the exhaust gases to escape the head, however to truly optimize the flow, headers are the only solution. These headers from MSDS are constructed using 16 gauge cold-rolled, mandrel bent steel, and welded on custom jig assemblies assuring a perfect fit. The headers come from MSDS in mild steel, requiring you to paint them to prevent corrosion, or you can opt for MSDS' ceramic coating procedure which assures they will last a lifetime. Installation requires you to cut the existing exhaust downpipes ahead of the catalytic converter, press in the new downpipes, then weld them in place. Some re-calibration of the air-fuel mixture may be required as well. It is highly recommended that you check the CO% of the exhaust gases after installation. It is also highly recommended that you install a free flow muffler at the same time to truly optimize the exhaust flow. Additional benefits can be realized with the installation of a high-flow cone intake and a performance chip as well. NOTE: Please allow 2-3 weeks for delivery. Ceramic coating will take an additional 2 weeks.

All MSDS exhaust/intake/upgrade products are sold for "Off road racing purposes only", and are not legal for sale or use on pollution-controlled vehicles.

Not for RHD vehicles.


Anti-Seize Products

Plan ahead for when you will be removing the hardware. Use an anti-seize product today and prevent headaches tomorrow!
Anti-Seize Compound - Liqui Moly LM 508 (100 g. Tube)  
[ More Info ]

Note: Copper based. Prevents seizing, galling, rusting, and corrosion on threaded connections.
Alert: This part contains hazardous or explosive materials and cannot be shipped (local pickup only).

Liqui Moly
Brand Rating
$7.25
Anti-Seize Compound - Loctite Anti-Seize Lubricant (1 oz. Tube)  
 
[ More Info ]

Note: Petroleum based (silver). Prevents seizing, galling, rusting, and corrosion on threaded connections.

Loctite
Brand Rating
$4.25
Anti-Seize Compound - Loctite Anti-Seize Lubricant (8 oz. Brushtop)  
[ More Info ]

Note: Petroleum based (silver). Prevents seizing, galling, rusting, and corrosion on threaded connections.

Loctite
Brand Rating
$9.75
Anti-Seize Compound Stick - Loctite Silver Anti-Seize Stick (20 g. Stick)  
 
[ More Info ]

Note: Prevents seizing, galling, rusting, and corrosion on threaded connections.

Loctite
Brand Rating
$6.25
Anti-Seize Compound - Loctite Anti-Seize Lubricant (8 oz. Brushtop)  
 
[ More Info ]

Note: Copper based. Prevents seizing, galling, rusting, and corrosion on threaded connections, Will call, delivery, or ground shipment only.~Item cannot be shipped by air.
Alert: This part contains hazardous or explosive materials and cannot be shipped (local pickup only).

Loctite
Brand Rating
$10.75
Using a quality anti-seize lubricant now can save you hours of pain-staking work the next time you attempt to remove that old hardware. These premium compounds offer high temperature resistance, corrosion protection, and good electrical conductivity.

Using a quality anti-seize lubricant now can save you hours of pain-staking work the next time you attempt to remove that old hardware. These premium compounds offer high temperature resistance and corrosion protection against water, alkaline solutions and acids.

Assembly Paste

Soft paste for fast, easy gas tight sealing of flanges and slip fittings in the exhaust system. No welding necessary. Sets with exhaust heat. Temperature resistant up to approximately 1292 deg F

BMW Home  >  1991 BMW 318i Base Sedan > Exhaust  >  Exhaust Pipes, Manifolds & EGR  

  Page 2 of 2  <12


Browse Exhaust Pipes, Manifolds & EGR for all 3-Series E30 (1983-1991) vehicles

Page last updated: Tue 12/5/2017 11:43:11 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window