When doing a rebuild, or replacing the head, you should always replace the bolts holding the head to the block, as they have a tendency to stretch after they are torqued, which can cause numerous problems including blown head gaskets, loss of compression, and possible engine damage if a bolt head breaks off inside the valve train.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.