Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1975 BMW 3.0Si Base Sedan
 
BMW Home > 1975 BMW 3.0Si Base Sedan > Water Cooling SystemWater Pump, Thermostat & Hoses 

Water Pump, Thermostat & Hoses

- Page 1

Water Pumps

Is your car starting to run a little hot? Is it overheating while sitting at idle? It's possible you may need to replace your water pump. An easy way to check your water pump is to look underneath the car and check for water seepage out of the pump. This means that water is leaking past the bearing and seals, indicating the pump is on its way out. Another way to check is to squeeze and hold the upper radiator hose for a few seconds (CAUTION: the hose may be hot) while the car is running. If you feel no pressure building up, it is a sign that water is not circulating and the pump may be bad. These units are brand new, not rebuilt.
Water Pump for Bolt on Fan Clutch
Water Pump for Bolt on Fan Clutch  
 
[ More Info ]

Note: Metal Impeller, Also use- (Qty.) (1) 11 51 1 265 654 gasket,

Graf
Brand Rating
$44.75

Coolant Thermostats

Is your car's temperature too hot or cold? A coolant thermostat allows the coolant to circulate when the engine has reached a predetermined temperature. It should close when the engine is cold to allow it to warm up faster. Thermostats can fail and should be inspected for corrosion when servicing the cooling system. Thermostats come in different temperature settings for different climates.
Coolant Thermostat

Coolant Pipes, Gaskets and O-Rings

The coolant pipes, gaskets and o-rings like any part of the cooling system can corrode and fail over time. Make sure to inspect them every time you service the cooling system.

Cooling Fan Relays and Switches

Don't get caught with out a proper functioning cooling system for the lack of a properly working switch or relay. Switches and relays can fail and if you are having problems with your cooling system this should be one of the first places you start trouble shooting.

Cooling System Tools

Bleeder tank, Pump, and 2ft. of hose and female brass fitting. Includes everything except the cap so you can customize your own kit for different setups or vehicles.
Motive Products 2-gallon Power Extractor new part number 1702 Power Extractor  
 
[ More Info ]

Note: Includes dipstick probe for oil changes and flexible tube for vacuum brake bleeding.

$64.95

BMW Home  >  1975 BMW 3.0Si Base Sedan > Water Cooling System  >  Water Pump, Thermostat & Hoses 

  Page 1 of 1  1


Browse Water Pump, Thermostat & Hoses for all 2800, 3.0, Bavaria (1968-1976) vehicles

Page last updated: Tue 12/12/2017 11:06:29 PM
QUICK LINKS
About Us
Careers
Pelican Parts, LLC
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window