Pelican Parts
BMW Parts Catalog Accessories Catalog BMW How To Articles BMW Tech Forums
Call Pelican Parts at 888-280-7799
1969 BMW 1602 Base Coupe
 
BMW Home > 1969 BMW 1602 Base Coupe > BrakesBrake Hydraulics 

Brake Hydraulics

- Page 3

Brake Hoses
Brake hoses and lines connect the master cylinder to the calipers. Over time, brake lines can eventually wear out, develop cracks, cause leaks, and even explode due to fatigue. They should be checked whenever servicing your brakes.

Brake Hose (Left or Right Rear Inner)

Brake Hose (Front Left or Right)
Brake Hose (Front Left or Right)  
 
[ More Info ]

  (4 per car, sold individually)
Note: from Ch# 1567864

Ate
Brand Rating
$9.50


Brake Lines

Brake Line Junction - Distribution Piece In-between Brake Lines (Rear)
UUC Stainless Steel Brake Lines
Original brake lines are rubber and can expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.

UUC's Stainless Steel Brake lines are used to "performance tune" your braking system.

Inner Teflon line is covered with woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. Results will be immediate.

    Technical features:
  • fully compliant with DOT Standards (MVSS-1006)
  • lines burst-tested to 6000psi (maximum tested pressure from a BMW braking system is 1200psi)
  • Teflon inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (translucent blue plastic covering).
  • plastic end pieces protect assembly, no exposed steel fibers to stick fingers.

Brake Master Cylinders

When you hit the brakes the master cylinder converts the motion from the brake pedal being depressed into hydraulic pressure and sends that hydraulic pressure out for distribution. If your brakes are starting to feel spongy it could be the master cylinder.
Brake Master Cylinder

Grommet - Brake Master Cylinder to Reservoir (17 X 6.5 mm)

Grommet - Brake Master Cylinder to Reservoir (22 X 7.3 mm)


BMW Home  >  1969 BMW 1602 Base Coupe > Brakes  >  Brake Hydraulics 

  Page 3 of 4  <1234>


Browse Brake Hydraulics for all 1600, 2002 (1967-1976) vehicles

Page last updated: Mon 11/13/2017 12:18:24 PM
QUICK LINKS
About Us
Careers
Pelican Parts, Inc.
1600 240th Street
Harbor City, CA 90710
Order Online or Call:
888-280-7799
CONNECT WITH US
NEWSLETTER
Sign Up for Pelican Pit Stop News & Special Offers

Close this window