Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

Home > Tools > Shop & Garage >  Heavy Shop Equipment

2-Post Lift w/Stack Pad $4836.50
The 2in1 Series gives you the option of selecting either symmetrical or asymmetrical lifting, depending on the vehicle you're servicing. • 9,000 lb. capacity. • Overhead beam 'clear... more...  

2-Post Low Ceiling Lift
For shops where ceiling height is a concern, the S2900L's base plate design offers lower height requirements with plenty of lifting power. • 9,000 lb. capacity. • Symmetric vehicle loading... more...  

4-Post 12000lb Lift
• 12,000 lb. capacity. • 24" wide deck runways. • Rigid one piece column construction • Heavy-duty hydraulic cylinders • Triple safety system • ALI/ETL Certified. • Available in Red or... more...  

Rim Clamp Air Tire Changer
• Built-in table top inflator with jets in the jaws (Air jets follow the rim contour for positive inflation on all size tires) • Unique mount/demount head. Does not touch rim during mount... more...  

4-Post Open Front Lift
• 12,000 lb. capacity. • 24" wide deck runways. • Heavier 9/16" 6 x 36 pre-stressed lifting cables for durability and added safety. • Larger 8" cast iron pulleys and brass "oilite" bushings... more...  

Power Drive System $3464.75
• Necessary for turning unpowered rotors while cutting rotors with an on-the-car lathe. • Attaches quickly and the constant speed gear drive assures a consistent finish. • 1750 RPM; 115V... more...  

60qt Super Truck Drain
A rugged plastic tub for draining a large capacity crankcase. Resistant to corrosives found in oils. Holds 60 quarts to the rim. Wire handle and heavy duty casters for easy moving. Splash... more...  

2-Ton Tripod Underlift Stand $137.25
• Ideal for supporting vehicle components under the vehicle • All steel construction for added strength • Wide base design for load stability Specifications: Max. height: 85-7/8" (2181... more...  

3-Ton Portable Low Rise Pad Lift
Plenty of power to raise vehicles weighing up to 6,000 lbs.Turns any area into a profit center. Portable to move in and out of work area. Sturdy design doesn't require bolting to the floor... more...  

Low Rise 6000lb Pad Lift
Plenty of power to raise vehicles weighing up to 6,000 lbs.Turns any area into a profit center. Sturdy design doesn't require bolting to the floor (brackets are provided if bolting down... more...  

Low-Clear Truck Clutch Handler $1065.75
• Open stance for ease of access to the work - Unique, patent pending linkage design rasies the load from horizontal to vertical as the pump is cycled. This eliminates any lifting of the... more...  

Wheel/Tire Step $54.00
Use this portable "step" to access hard to reach places like engine compartments, van roofs and truck tops. Fits on the tire to provide added height. Will adjust to three positions vertically... more...  

50pk-4"String Type Tire Plugs $8.75
• 4" Long - 50 per box • Passenger car & truck tire ... more...  

Center Post Tire Changer $3548.00
The model 4050A sets the industry standard for high-volume center post tire changer design. Modeled after the popular 40-40SA Center Post Tire Changer, the Model 4050A represents the most... more...  

110v Computer Wheel Balancer $4044.25
SPEED • Efficient, 10 secon cycle time with 14" wheel • One piece pressure cup mounting assembly - 10 turns to tighten • Fast, kepad data entry eliminate dials VERSATILITY • 3 balancing... more...  

Hi-Volume Wheel Balancer $6345.50
... more...  

Electronic Wheel Balancer $4537.25
This small high precision balancer is ideal where space is at a premium and its powerful mircroprocessor guarantees high precision plus a full range of balancing programs to meets your needs... more...  

Deluxe Tire Changer
The Corghi A2019TI-20 is a legend among tire changers. It features: • Designed to service run-flat, EMT and high performance tires • Pneumatic locking mount/demount head • Rigid stainless... more...  

Headlamp Aimer Va50
• Universal - will aim any headlamp on any vehicle, any year, any make, any model, anywhere! • Accurate - will aim headlamps within specifications required in vehicle inspection programs... more...  

Vision 100 Photometric Headlight Aimer
• Affordable - Just do a dozen aims a month and the Vision 100 will be paid for in less than 6 months. The rest is pure profit. • Accurate - Designed to accurately aim all North American... more...  

Vision 1 Optical Headlamp Aimer
• Aims quickly: Beat flat-rate time and increase profits. • Displays actual beam pattern: Accurate to one tenth of an inch. • The aim window can be set precisely to meet state regulations... more...  

Engine Support Bar 1100lb Cap $120.50
Manufacturer: OTC DIVISION OF SPX CORP    Click here to visit the manufacturer's home page ... more...  

10-Ton Air/ Hydraulic End Lift $3188.75
10-Ton lifting capacity at 200 PSI air supply. Extra wide stance for extra stability. Complete air operation for low maintenance and long life. A little squeeze is all it takes to lift... more...  

2-Ton Engine Crane $481.50
• A very versatile floor crane for almost any lifting job • Folds up for easy storage • Reach: 25" to 46" • Features 3-1/2" swivel casters and 5-7/8" fixed wheels for easy maneuverability... more...  

2-Ton Mobile Crane $453.25
• 4 position boom • Low 4" clearance gets under more cars without requiring jacking up of the vehicle. • Shipped in 2 boxes • 4000 lb rated capacity, heavy duty, slow release Manufacturer... more...  

20-Ton H-Frame Hydraulic Press $578.75
• All welded steel contruction • Heavy-duty return springs for fast ram retraction • 20 Ton - Hydraulic unit included • Reinforced head plate • Designed and made in the U.S.A, hydraulic... more...  

Air-Rim Clamp Tire Changer/With Robotic Arm $9372.50
... more...  

1/2 Ton Cone Adapter/Van/Pickup Wheel Balancer $135.75
• For or light trucks up to 1 ton with center holes ranging from 3.38" to 5.88" • Fits Coats models: 600, 650, 700, 850, 950, 1001, 1004, 1050 ... more...  

Light Truck Cone Kit w/Pressure Cup $123.25
Manufacturer: CORGHI    Click here to visit the manufacturer's home page ... more...  

Replacement Barbed Rasp For 8427 Tire Repair Tool $4.50
... more...  

Split-Eye Replacement Needle Tire Repair Tool $4.00
... more...  

Replacement Spiral Probe For 8427 Tire Repair Tool $4.50
... more...  

3/4"-1 Ton Wheel Balancer Kit $480.25
• Includes cone and spacer for or light trucks up to 1 ton with center holes ranging from 3.38" to 5.88" • Fits Coats models: 600, 650, 700, 850, 950, 1001, 1004, 1050 • Includes cone and... more...  

Chrome T-Handle Split-Eye Tire Repair Tool $13.50
Professional quality tool for the tire repair ... more...  

Chrome T-Handle Spiral Probe Tire Repair Tool $13.50
Professional quality puncture repair tool. ... more...  

        

 
  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.