Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

Home > Tools >  Mercedes Benz Specialty Tools

Wheel Hanger Tool $29.00
This tool screws into one of the wheel stud holes to make it easier to mount or remove the wheels on your car. It is manufactured from pure brass with a polished finish for easy sliding... more...  

European Power Bleeder Kit $46.95
The European Power Bleeder Kit works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm... more...  

Black Label European Power Bleeder Kit $63.95
The Black Label European Power Bleeder Kit features a custom-machined aluminum cap and deluxe swivel fitting. Comes with an extra length of high grade poly urethane tubing that won't cloud... more...  

Sliding Puller Guide with 5mm and 6mm extractor pins $32.30
Sliding Puller Guide needed for the proper extraction of rail pins from cylinder head. Comes equipped with a 5mm and 6mm extractor pin. Compare this Sliding Puller Guide with Rail Pin Puller... more...  

Chain Tensioner Extractor Tip $21.70
Extractor Tip needed for pulling chain tensioners. Used in conjunction with a slide hammer. ... more...  

Seal Guide - M104, M103 3/89+ $26.60
Needed to prevent damage to the seal during installation of timing cover with seal already in place. ... more...  

Seal Guide - M103 2/89- $26.60
Needed to prevent damage to the seal during installation of timing cover with seal already in place. ... more...  

Collet Type - Steering Pump Pulley Puller
Puller (Collet Type), needed for the proper extraction of steering pump pulleys. ... more...  

Steering Pump Puller $32.30
Puller (Bracket Type), needed for the proper extraction of steering pump pulleys. ... more...  

Threaded Pin Wrench Socket for prechamber in cylinder head $68.80
Threaded Pin Wrench Socket needed for the proper R and R of threaded ring which secures prechamber in cylinder head. ... more...  

Chain Tensioner (Rigid) $26.60
Chain Tensioner (Rigid), needed for the proper R and R of cam shaft and its housing while checking and adjusting cam shaft timing. ... more...  

Male Splined Socket for prechamber in cylinder head $50.10
Male Splined Socket with 1/2 in. drive, needed for the proper R and R of threaded ring which secures prechamber in cylinder head. ... more...  

Special 29mm Socket $26.60
Special 29mm Socket with 3/4 in. drive, needed for the proper R and R of transmission tail shaft retaining nut. ... more...  

Oil Seal Arbor $31.50
Arbor needed for the proper installation of oil seal on pulley side of crank shaft. ... more...  

8mm Allen/U Body Socket for Cylinder Head Bolts $42.80
Designed U Body 8mm Allen Socket with 1/2 in. drive, needed for the proper R and R of cylinder head bolts. ... more...  

Oil Seal Arbor $44.50
Arbor needed for the proper installation of oil seal on pulley side of crank shaft. ... more...  

Lazy Z Eccentric Extension for valve adjustment on Mercedes $13.30
Lazy Z Extension with 3/8 in. drive and an overall length of 4, needed for adjusting valves on Mercedes models. Used in conjunction with Crows Foot No.M 0016 and M 0017. ... more...  

14mm Crows Foot for valve adjustment $13.30
14mm Crows Foot with 3/8 in. drive, needed for adjusting valves. Used in conjunction with Extension No.M 0015. ... more...  

Breaker Plug $19.50
Breaker Plug needed to STOP current flow to the coil. This eliminates any chance of ignition while the engine is being turned over. This Breaker Plug is crucial when checking compression... more...  

32 Point Female Socket for delivery valve of diesel injection pump $38.80
32 Point Female Socket with 1/2 in. drive, needed R and R of delivery valve of diesel injection pump. ... more...  

Parking Brake Spring Installer $24.20
Needed for proper R and R of pressure spring on parking brake shoe. ... more...  

Allen Wrench Holding Bar $39.60
Comes complete with 8 and 10mm Allen bits. The 8mm is needed for R and R of fan clutch fastener. The 10mm bit is for adjusting A/C belt tension and R and R of idler pulley Models 420, 560... more...  

Go-No-Go Gauge $54.60
Go-No-Go Gauge needed for checking hydraulic valve lifters. ... more...  

Dial Gauge Holder $68.00
Dial Gauge Holder needed for checking hydraulic valve lifters. Used in conjunction with a dial indicator. ... more...  

Pin Wrench Socket for nut on drive pinion shaft flange of differential $50.90
Pin Wrench Socket for grooved nut on drive pinion shaft flange of differential, 1/2 in. drive, Applicable - Mercedes chassis - W107, W114, W115, W116, W123, W126. Models with constant velocity... more...  

Pin Wrench Socket for nut on rear axle shaft flange $52.60
Pin Wrench Socket with 1/2 in. drive, needed for R and R of grooved nut on rear axle shaft flange, necessary when replacing axle bearing or seal. ... more...  

Pin Wrench Socket for nut on front differential counter shaft $31.50
Pin Wrench Socket with 1/2 in. drive, needed for R and R of grooved nut on front differential counter shaft. ... more...  

Pin Wrench Socket for nut on transmission drive shaft flange $48.50
Pin Wrench Socket with 1/2 in. drive, needed for R and R of grooved nut on transmission drive shaft flange. ... more...  

Pin Wrench Socket for nut on drive pinion shaft flange of differential
Pin Wrench Socket with 1/2 in. drive, needed for R and R of grooved nut on drive pinion shaft flange of differential. ... more...  

Pin Wrench Socket for nut on transmission drive shaft flange $52.60
Pin Wrench Socket with 1/2 in. drive, needed for R and R of grooved nut on transmission drive shaft flange. ... more...  

Puller (Collet Type) $149.80
Puller (Collet Type), needed for the proper removal of spacer ring from the pulley side of crank shaft. ... more...  

Steering Box Repair Kit $72.80
Steering Box Repair Kit needed for proper R and R of locking grooved nut and sector control piston. ... more...  

Timing Chain Guide $51.70
Chain Guide designed for efficient and proper installation of timing chains. ... more...  

Locking Nut for securing the diesel injection pump cam shaft. $34.70
Locking Nut needed for securing the diesel injection pump cam shaft. ... more...  

Locking Hook $15.70
Locking Hook needed for securing the visco fan coupling during R and R of 8mm hex fastener w/o removing the radiator. ... more...  

Valve Stem Seal Installer (9mm) $27.50
Valve Stem Seal Installer (9mm), Applicable - Mercedes engine - M100, M114, M115, M116, M117, M130, M180, OM615, OM616. ... more...  

Valve Stem Seal Installer (11mm) $27.50
Valve Stem Seal Installer (11mm), Applicable - Mercedes engine - M110, M114, M115, M116, M117, M130, M180, OM615, OM616. ... more...  

Rail Pin Puller Guide with 6mm extractor pin $56.70
Rail Pin Puller Guide (Overall Length of 85mm), designed with a thrust bearing to ease the pulling action. Needed for the proper extraction of rail pins from cylinder head. Especially useful... more...  

Turning Sleeve for ignition/steering lock cover $35.50
Turning Sleeve needed for the proper R and R of the protective cover for ignition/steering lock. Mercedes Factory number 126-0714. ... more...  

Extractor Tip for prechamber in cylinder head $35.50
Extractor Tip (Double Ended), needed for the proper removal of prechamber from cylinder head. Used in conjunction with a slide hammer. ... more...  

Rail Pin Puller w/ Extractor Pin Set $110.90
Impact Type Rail Pin Puller comes complete with a set of 5 Extractor Pins and its own easy to hold, hand-sized slide hammer. Comes with extractor pin sizes - 6X50mm / 6X150mm / 8X150mm ... more...  

Timing Chain Crimping Tool $149.00
Crimping/Press Tool needed for the proper assembly of timing chain master link for Mercedes Benz. Also fits Saab and BMW! NOTE: Must be used in conjunction with Adaptor Bit #M0050-A or M... more...  

Valve Guide Installer 9mm $36.40
Valve Guide Installer 9mm, Applicable - Mercedes engine - M102. ... more...  

Valve Guide Installer 9mm $36.40
Valve Guide Installer 9mm, Applicable - Mercedes engines with new modified valve guides. ... more...  

Valve Guide Installer 10mm $36.40
Valve Guide Installer 10mm, Applicable - Mercedes engine OM615, OM616, OM617. ... more...  

Valve Guide Installer 11mm $36.40
Valve Guide Installer 11mm, Applicable - Mercedes V8 engines. ... more...  

Pin Kit $19.50
Pins (2 pair) Needed for the proper removal of Ignition lock. ... more...  

Ford Distributer Module Socket $23.40
Wire Hooks (Pair), needed for the proper removal of instrument cluster. Two lengths available. ... more...  

Oil Seal Arbor $53.40
Arbor needed for the proper installation of oil seal on pulley side of crank shaft. ... more...  

Lower Control Arm Bushing Press Kit $145.70
Press Kit needed for the proper installation of bushings into the front lower control arms. Each press washer has its own thrust bearing which eases the pressing action. This reduces friction... more...  

Ball Joint Press tool $319.90
Press Tool needed for the proper installation of ball joint into steering knuckle. Superior design allows for mounting in a vice w/o marring the tool or bending under pressure. Big Time... more...  

Clutch Piston Assembly Sleeve 111.70mm $32.30
Needed for installing the clutch piston into the external disc carrier on transmission - 722.1, 722.3, 722.4 ... more...  

Clutch Piston Assembly Sleeve $32.30
Sir Tools Assembly Sleeve (127.60mm) is needed for installing the clutch piston into the external disc carrier on Transmission - 722.4, 722.1, 722.3 ... more...  

Valve Spring Compressor Kit $156.00
Spring Compressor Kit needed for R and R of valve spring or rocker arm. Job can be done with the cylinder head on or off the car. ... more...  

Valve Spring Compressor Kit $161.80
Spring Compressor Kit needed for R and R of valve spring or rocker arm. Job can be done with the cylinder head on or off the car. ... more...  

Mercedes Coil Spring Compressor Kit w/ Case $526.50
Spring Compressor Kit for front and rear coil springs. Comes with a convenient carrying case. ... more...  

Valve Spring Compressor Kit $231.60
Valve Spring Compressor Kit needed for R and R of valve spring or rocker arm. Job can be done with the cylinder head on or off the car. ... more...  

Valve Spring Depressor Foot $29.50
Depressor foot needed for compressing valve springs. Used in conjunction with Valve Spring Compressor KitNo. M 0069. ... more...  

Support Bridge $47.70
Support Bridge used in conjunction with Depressor Foot No. M 0071 and Valve Spring Compressor Kit No. M 0069. ... more...  

Bushing Tool for differential sub-frame bushings $105.20
Bushing Tool needed for R and R of differential sub-frame bushings. This is the most efficient unit on the market. Each driver nut has its own thrust bearing which eases the pressing and... more...  

Press Adapter Kit for ball joints. $129.50
Needed for the proper R and R of ball joints of the lower control arm. Used in conjunction with a hydraulic press. ... more...  

17mm Point Male (16 point) Splined Socket 1/2 Drive $28.30
17mm Point Male (16 point) Splined Socket 1/2 Drive ... more...  

Expansion Tank Adapter $47.70
Expansion Tank Adapter needed for pressurizing the liquid cooling system on models with a threaded filler neck on expansion tank. ... more...  

Brake Band Piston Cover Press Kit $121.40
Needed to properly compress the brake band piston cover in order for R and R of the locking ring. ... more...  

Metal Clad Bushing R and R Kit $238.90
Needed for the proper R and R of FRONT metal-clad rubber mount bushings of rear axle carrier sub-frame. This S.T. special service tool has been thoroughly Field Tested and redesigned. Incorporating... more...  

Turning Tool for ignition/steering lock cover $35.50
Needed for the proper R and R of protective cover from ignition / steering Lock. Mercedes Factory number 210-0007. Aluminum will not leave marks on the auto part ... more...  

Thin Wrench $40.40
65mm with an 8mm overall thickness and a length of 16 inches for proper leverage. Needed for securing the fan hub from rotating during R and R. Used in conjunction with tool M0022. ... more...  

Double Ended Turning Sleeve $64.70
Needed for the R and R of protective cover from ignition /steering lock. Flat rubber insert ensures a firm grip and scuff protection. ... more...  

Camshaft Securing Pins $29.90
Pair of pins, needed for the proper alignment of cam shafts during R and R. ...