| Porsche Tools - Page 3 |
Porsche Engine Rebuild Stand |
| Engine Yoke Securing Nuts |
| Finally, a clean and elegant way to secure your 911 engine to the factory-style yoke - no more sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length engine case studs to the yoke. Not only will you no longer need to hunt for the right combination of hardware to fit, but with the built-in clearance of these stainless steel nuts and adapters, you will be able to easily install and remove flywheels and clutch assemblies while the engine is on the stand! |
|
STOMSKI-SR028 | Stomski Racing Engine Yoke Securing Nut/Adapter Set, for Porsche engine stand fixtures (P201) [More Info] | $47.50 |  |
12-Point/12mm Flywheel Socket |
| Get the correct socket to remove/install those Flywheel Bolts ! |
|
| :PEL-TOL-1170 | Flywheel Bolt Socket Tool, 12-Point/12mm [More Info] | | |
Heavy Duty Flywheel Lock |
| Getting ready to remove that flywheel? You're going to need this heavy duty flywheel lock. Makes that job so much safer and easier! |
|
PEL-UN1201100 | Flywheel Lock, 911 (1965-73), 912 (1965-69) 914 All [More Info] | $17.15 | |
| 000-721-916-10-OEM | Flywheel Lock Tool (1978-82), 928 [More Info] | $52.50 | |
| 000-721-916-11-OEM | Flywheel Tool Late (1983-95), 928 [More Info] | $52.50 | |
| Flywheel Lock Down Kit |
| This 19-Piece Flywheel lock down tool set is used to secure the crankshaft from rotating. Fits practically any vehicle - completely covers all European Cars! |
|
SCHW-PTK-19PCS | Flywheel Lock Down Kit, 19-Piece [More Info] | $85.00 | |
Oil Filter Wrenches |
| Get off easily with our new oil filter wrench! This wrench attaches directly to the top of the oil filter and allows you to attach a standard 3/8" drive ratchet to remove the filter. Gone are the days of poking messy holes in the filter just to get a screwdriver in there to remove it from the oil tank. |
|
TOL-LIS-54780 | Oil Filter Removal Socket Wrench Tool (93mm x 15 flutes), 3/8” drive - 911/C2/C4 (1965-94), 911 Turbo (1976-89)
Brand: Lisle [More Info] | $7.65 | |
| This factory tool for your 996 or Boxster will surely do the trick! Use it in conjunction with a quality 27mm 6-point socket, and you'll be done with your oil change in no time. |
|
000-721-920-40-OEM | Oil Filter Removal Socket Wrench Tool - 996/996 Turbo (1999-2004), Boxster/Boxster S (1997- ), Cayman/Cayman S (2006- ), 997 Carrera (2005- ) [More Info] | $39.00 | |
| SK Tools SureGrip hex design drives the side of the fastener, not the corner. Corrosive resistant. Made in the U.S.A. Lifetime Warranty. |
|
| TOL-SK34277 | Deep Impact Socket, 27mm, 6-point, 1/2"-Drive, SK Tools [More Info] | $24.11 | |
TOL-SK34077 | Standard Impact Socket, 27mm, 6-point, 1/2"-Drive, SK Tools [More Info] | $18.50 | |
Drain Plug Removal Tool |
| If your Boxster's drain plug is the tamper-proof type, you'll need the Triple-Square tool to remove the drain plug. |
|
PEL-TOL-ST0229 | 16mm XZN Triple Square (Tamper Proof) Drain Plug Removal Tool for 5-Speed Manual Transmission, 1/2 in drive, Boxster (1997-04) [More Info] | $34.95 | |
