| Porsche Tools - Page 2 |
Porsche Engine Rebuild Stand |
| Engine Stand Adapter Ring |
This Engine Stand Adapter Ring will easily bolt onto any universal engine stand, using four 3/8" bolts, giving you a safe and easy way to work on any 356 to 930 Porsche engine. This is a very heavy-duty piece that is machined from solid steel, with all the right notches and relief angles to accommodate all Porsche and VW air cooled engines.
NOTE: Universally adjustable adapter not included with ring. These come with most engine stands available here. |
|
PEL-TOL-MCDENG | Engine Stand Adapter Ring for Porsche and VW air-cooled engines [Photo] | $132.70 |  |
| U-Base Engine Stand |
• Heavy duty mounting plate and adapter arms for servicing light truck and car engines
• Heavy-duty four wheeled base increases stability
• Wide 'mouth' base opening works with most mobile engine cranes
• Fixed polyurethane back wheels; poly swivel castors on front for smooth travel
• 24" handle makes easy work of rotating the engine 360 degrees; hitch pin locks engine in place
• Built-in tool tray keeps frequently needed tools right close to work area
• OTC 2 year warranty
Manufacturer: OTC DIVISION OF SPX CORP
Click here to visit the manufacturer's home page
Not exactly what you're looking for? Check out the rest of the selection here! |
|
TOL-OTC2012 | U-Base Engine Stand - 1250 lbs [Photo] | $114.90 | |
| Engine Yoke Securing Nuts |
| Finally, a clean and elegant way to secure your 911 engine to the factory-style yoke - no more sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length engine case studs to the yoke. Not only will you no longer need to hunt for the right combination of hardware to fit, but with the built-in clearance of these stainless steel nuts and adapters, you will be able to easily install and remove flywheels and clutch assemblies while the engine is on the stand! |
|
STOMSKI-SR028 | Stomski Racing Engine Yoke Securing Nut/Adapter Set, for Porsche engine stand fixtures (P201) [Photo] | Temporarily unavailable | |
12-Point/12mm Flywheel Socket |
| Get the correct socket to remove/install those Flywheel Bolts ! |
|
PEL-TOL-1170 | Flywheel Bolt Socket Tool, 12-Point/12mm [Photo] | $35.05 | |
Heavy Duty Flywheel Lock |
| Getting ready to remove that flywheel? You're going to need this heavy duty flywheel lock. Makes that job so much safer and easier! |
|
PEL-UN1201100 | Flywheel Lock, 911 (1965-73), 912 (1965-69) 914 All [Photo] | $16.15 | |
| 000-721-916-10-OEM | Flywheel Lock Tool (1978-82), 928 | $53.75 | |
| 000-721-916-11-OEM | Flywheel Tool Late, (1983-95), 928 | $53.75 | |
Oil Filter Wrenches |
| Get off easily with our new oil filter wrench! This wrench attaches directly to the top of the oil filter and allows you to attach a standard 3/8" drive ratchet to remove the filter. Gone are the days of poking messy holes in the filter just to get a screwdriver in there to remove it from the oil tank. |
|
PEL-PP903124 | Oil Filter Removal Socket Wrench Tool - 911/C2/C4 (1965-94), 911 Turbo (1976-89) [Photo] | $10.10 | |
| This factory tool for your 996 or Boxster will surely do the trick! Use it in conjunction with a 27mm 6-point socket, and you'll be done with your oil change in no time. |
|
000-721-920-40-OEM | Oil Filter Removal Socket Wrench Tool - 996/996 Turbo (1999-2004), Boxster/Boxster S (1997- ), 997 Carrera (2005- ) [Photo] | $36.50 | |
| TOL-SK34277 | 27mm 1/2"-Drive Deep Impact Socket, 6-point, SK Tools | $22.95 | |
Drain Plug Removal Tool |
| If your Boxster's drain plug is the tamper-proof type, you'll need this tool to remove the drain plug. |
|
PEL-TOL-ST0229 | 16mm XZN Triple Square (Tamper Proof) Drain Plug Removal Tool, 1/2 inch drive [Photo] | $28.30 | |
