| BMW Parts - Tools - Page 7 |
Engine Tools |
| Tappet Depressors |
| This tool is used on M engines to preload the cam follower in order to remove/replace valve adjustment shims. |
|
TOL-3012 | Tappet Depressor, BMW, For All M Models Except European Cars, Each [More Info] | $117.60 |  |
Transmission Tools |
| Transmission Bearing Extractors |
| These bearing extractors are used to pull bearings out of the BMW transmission when doing a rebuild. |
|
PEL-TOL-242 | Transmission Bearing Extractor Master Kit (contains all extractors listed below), Each [More Info] | $587.20 | |
| PEL-TOL-242A | Transmission Bearing Extractor, For 44.50 to 41.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242B | Transmission Bearing Extractor, For 37 to 35mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242C | Transmission Bearing Extractor, For 41.50 to 38.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242E | Transmission Bearing Extractor, For 40.50 to 38.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242F | Transmission Bearing Extractor, For 42.50 to 40.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242G | Transmission Bearing Extractor, For 43.50 to 41mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242H | Transmission Bearing Extractor, For 32 to 30mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242I | Transmission Bearing Extractor, For 48 to 45.50mm sized bearings, Each [More Info] | $71.40 | |
| 30mm Flange Nut Socket |
| This special 30mm deep walled socket is used to remove both the drive shaft flange nuts and the pinion drive shaft nuts on the differential. |
|
PEL-TOL-3025 | 30mm Flange Nut Socket, BMW All Models, Each [More Info] | $44.50 | |
| Drain Plug Socket Set |
TOL-BMW3061 | Drain Plug Socket Set of 3, Single Piece Construction, Universal for most BMW applications (Includes 10mm, 14mm, 17mm), Set Note: Please verify size before ordering. [More Info] | $33.95 | |
| Transmission Drain Plug Socket |
| This special 17mm ID socket is used to remove the transmission fill and drain plugs. This tool is essential when doing any transmission service. Please be sure to check first if your transmission uses this type and size of plug before ordering. |
|
PEL-DPR-1017 | Transmission Drain Plug Socket, BMW Models with 17mm allen plugs ONLY, Each [More Info] | $28.50 | |
| Differential Mount Bushing Kit |
TOL-BMW3066 | Differential Mount Bushing Kit, Front, Needed for servicing front differential mount bushings in rear subframe (Bushing #33-17-6-770-788-M69), E46 3-series (Except M3) BMW Service Tool Reference #33-3-360 [More Info] | $168.95 | |
TOL-BMW3067 | Differential Mount Bushing Kit, Rear, Needed for servicing rear transverse differential mount bushings in rear subframe (Bushing #33-17-6-751-808), E46 3-series (Except M3), BMW Service Tool Reference #33-3-370 [More Info] | $184.95 | |
