| BMW E36 Tools - Page 6 |
Transmission Tools |
| 30mm Flange Nut Socket |
| This special 30mm deep walled socket is used to remove both the drive shaft flange nuts and the pinion drive shaft nuts on the differential. |
|
PEL-TOL-3025 | 30mm Flange Nut Socket, BMW All Models, Each [Photo] | $40.40 |  |
| Transmission Drain Plug Socket |
| This special 17mm ID socket is used to remove the transmission fill and drain plugs. This tool is essential when doing any transmission service. Please be sure to check first if your transmission uses this type of plug before ordering. |
|
PEL-DPR-1017 | Transmission Drain Plug Socket, BMW All Models with 17mm allen plugs, Each [Photo] | $25.00 | |
| Differential Drain Plug Tool |
| This special 10mm Allen wrench is used to remove the differential oil drain plug. |
|
PEL-TOL-3005 | Differential Drain Plug Tool, Fits 10mm Hex Plugs Only, BMW All Models, Each [Photo] | $23.80 | |
| Transmission/Differential Oil Seal Arbors |
| These oil seal arbors are used to properly install the oil seals on the transmission and differential output shafts. |
|
PEL-TOL-3000 | Transmission Oil Seal Arbor For Getrag Transmissions, Check Plate on Transmission for Model Number, All Getrag G242/262/G240 and 260 transmissions, Each 21.00 [Photo] | $16.20 | |
PEL-TOL-3020 | Differential Oil Seal Arbor, BMW All E23, E24, E28, E30 E32 And E34 Models, Each [Photo] | $34.00 | |
Clutch Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Torx Female Socket Set |
| These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16. |
|
TOL-LIS26750 | Torx Female Socket Set [Photo] | $16.50 | |
| Clutch Wear Gauge |
| This tool allows you to check the thickness of the clutch disc without having to remove the transmission |
|
PEL-TOL-3004 | Clutch Wear Gauge, BMW All Models (1975-on), Each [Photo] | $20.20 | |
| Pilot Bearing Puller |
| Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
|
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [Photo] | $55.00 | |
