| BMW E36 Tools - Page 2 |
BMW Suspension Tools |
| Front Wheel Hub/Bearing Nut Socket |
83-30-0-491-896-BOE | Front Wheel Hub/Bearing Nut Socket - 46mm, 3/4 in. Drive, BMW Tool #31-2-080, fits E23, E24, E28, E32, E34, E36, E38, E46 [More Info] | $56.25 |  |
| Rear Wheel Bearing Extractor and Installer Kit |
| If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one master kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier. |
|
PEL-TOL-SIRB90-B2 | Hub/Bearing Extractor and Installer Kit, E46 320, 323, 325 (except Xi), 328 [More Info] | $329.00 | |
PEL-TOL-SIRB90-B3 | Hub/Bearing Extractor and Installer Kit, E46 325Xi, 330, M3 [More Info] | $294.00 | |
| PEL-TOL-SIRB90-B4 For the professional installer. Includes the components to R/R most BMW models, including: E23, E24, E28, E30, E31, E34, E36, E38, E46, Z3
|
|
PEL-TOL-SIRB90-B4 | Hub/Bearing Extractor and Installer "Master" Kit [More Info] | $449.00 | |
| Front Control Arm Bushing Master Kit |
| Designed for efficient and selective "On The Car" removal and installation of the front control/track arm bushings. This bushing master kit eliminates the need to disassemble the whole control/track arm from the car in order to extract and then install a bushing with a hydraulic press, while the rest of the bushings on the arm are in good condition. The driver nut incorporates a thrust bearing, easing the press action, ensuring the longevity of the tool. |
|
TOL-BMW3021 | Front Control Arm Bushing Master Kit, BMW, All 5 Series E28/E34 (1982-1995), All E24 6 Series, All E32 7 Series (1988-1995), All E31 8 Series (1991-1996), Includes Both 50mm & 60mm receiver cups [More Info] | $193.20 | |
| Press Arbor Kit/Outer Ball Joints |
| Designed for the proper removal and installation of the outer ball joints on the front control arms on 3 Series Models. Comes complete with all the components to perfectly mate up to the factory ball joints. Must be used in conjunction with a hydraulic press. |
|
PEL-TOL-3038 | Press Arbor Kit, BMW E30 3 Series (1984-92), E36 3 Series (1992-98), E46 3 Series (1999-05) [More Info] | $175.60 | |
| Press Arbor Kit/Inner Ball Joints |
| Designed for the proper removal and installation of the inner ball joints on the front control arms on 3 Series Models. Used in conjunction with a hydraulic press, Or on the car application when used in conjunction with a C-Clamp. |
|
PEL-TOL-3028 | Press Arbor Kit, BMW E30 3 Series (1984-92), E36 3 Series (1992-98), E46 3 Series (1999-05) [More Info] | $153.70 | |
| Separator |
| Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots. Base of opening is 18mm |
|
PEL-TOL-266H | Separator, Universal, 18mm opening [More Info] | $46.20 | |
| Heavy Duty Separator |
| Designed for the proper disassembly of ball joints on drag links and tie rods. Base of opening is 21.5mm |
|
PEL-TOL-3029 | Heavy Duty Separator, Universal, 21.5mm opening [More Info] | $83.10 | |
| Designed for the proper disassembly of ball joints from lower wishbone. Base of opening is 25.5mm |
|
PEL-TOL-3030 | Heavy Duty Separator, Universal, 25.5mm opening [More Info] | $92.40 | |
