| BMW E46 Engine Tools - Page 2 |
Camshaft Holding Tool  |
| You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
|
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin), Fits M42, M44, M50, M52, M54, S50, S52 Engines, Each [Photo] [Photo] | $145.70 |  |
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines [Photo] | $102.80 | |
Timing Chain Crimping Tools |
This tool is used in order to crimp together the master link of your BMW's timing chain.
NOTE: Must be used in conjunction with adapter bit #TOL-M-0050-B (sold separately). |
|
TOL-M-0050-SIR | Timing Chain Crimping Tool, Adaptor Bit Not Included, All BMW Engines With Timing Chains, Each [Photo] | $149.00 | |
TOL-M-0050-B | Timing Chain Crimping Tool Adaptor Bit, For All BMW Timing Chains, Each [Photo] | $40.40 | |
Tappet Depressors |
| This tool is used on M engines to preload the cam follower in order to remove/replace valve adjustment shims. |
|
TOL-3012 | Tappet Depressor, BMW, For All M Models Except European Cars, Each [Photo] | $97.20 | |
Universal Valve Spring Compressor |
| This universal valve spring compressor has been developed to remove and install the valve spring with the cylinder head still on the engine and in the car, or with the cylinder head removed. The multi-point adjustable base of this tool bolts securely to the head while the adjustable lever mechanism pivots from the bar thus compressing the spring. Quick removal and installation of the spring retaining keepers is then easily accomplished through the large openings on both sides of the compression tube. Comes with storage tray. Manufacturer: SCHLEY PRODUCTS |
|
TOL-SP91400 | Universal Valve Spring Compressor [Photo] | $98.75 | |
| OHV Valve Spring Compressor |
| Compressor easily removes valve springs on most cars and light trucks. Tool can be used with the cylinder head on or off the engine. Features a removable handle allowing use with 5/8" socket or wrench in confined areas and an extra-long leg for more applications. For best results, use with 901 or 2992 Air Hold Fittings to pressurize the cylinder and keep the valves in place during removal of the spring and keepers. Includes: Long Leg, length 3 15/32", Short Leg, length 3 5/32" Manufacturer: KD TOOLS |
|
TOL-KD3271 | OHV Valve Spring Compressor [Photo] | $39.50 | |
Cylinder Head Rethreader |
| Repair damaged 14mm spark plug threads by opening hole with a reamer/tap and screwing insert onto the spark plug. Use spark plug socket to install spark plug and insert. Remove plug and check that insert is properly seated. Set includes 1 each of 4 inserts: 3/8, 7/16, 1/2 and 3/4" reach and thread locking compound. Tap is designed for aluminum heads only. Manufacturer: KD TOOLS |
|
TOL-KD2125 | Cylinder Head Rethreader, 14mm Tap/Reamer [Photo] | $27.75 | |
Dual Overhead Cam Lock Tool |
| This versatile tool easily locks and holds both camshaft sprockets firmly in place. The two parallel bars "float" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt and chain replacement. Manufacturer: LISLE |
|
TOL-LIS36880 | Dual Overhead Cam Lock Tool [Photo] | $36.00 | |
Piston Ring Compressor Set |
| Install pistons from 2-7/8" to 4-3/8" (73 to 111mm). Pliers can be used parallel or perpendicular to the cylinder block. Fine-tooth ratcheting lock allows you to compress bands in small increments. Set works by placing a band around the piston, covering the rings and hooking pliers into the band and squeezing. With the band tightly around the piston, insert piston into cylinder and tap lightly with hammer handle to install. Set includes pliers and 6 bands, 1119 through 1124. Manufacturer: KD TOOLS |
|
| TOL-KD850 | Piston Ring Compressor Set | $62.75 | |
