|  | | | BMW E46 Engine Tools - Page 1 | Flywheel Lock | | This is the correct tool used for locking the crankshaft in the TDC position when adjusting or replacing timing components. |
| 
88-88-6-112-300-BOE | Flywheel Lock, For BMW Engines: M42, M44, M50, S50, M52, S52, M54, S54, M60, M62, S62, M70, M73. Service manual reference # 11 2 300 [Photo] | $28.75 |  | Crank Pulley Securing Tools  | | These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
| 
TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [Photo] | $55.80 | | 
TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [Photo] | $47.70 | | 
TOL-3034-3 | Crank Pulley Securing Tool, For BMW M30 Engines, Each [Photo] | $47.70 | | 
TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [Photo] | $136.20 | | Universal Oil Seal Extractors | | This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
| 
TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [Photo] | No Longer Available | | Engine Turning Bars | | These handy engine turning bars are used to rotate the engine using the timing chain. A great tool to have if you are setting the timing on your car or adjusting the valves. |
| 
TOL-3015 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Single Timing Chain, Each [Photo] | $79.30 | | 
TOL-3016 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Dual Row Timing Chain, Each [Photo] | $47.70 | | Chain Tensioner Tools | | Use this tool in place of the spring-loaded tensioner when timing the camshafts during VANOS installation. It's important to use this tool, and not to rely solely on the spring-loaded tensioner - it does not provide enough tension when the car is sitting to accurate time the camshafts. See how it is used here. |
| 
83-30-0-493-548-BOE | Tensioner Pressure Tool, For BMW S50, M50 and M62 Engines, service manual reference #11 3 390, Each
Brand: Genuine BMW [Photo] | $45.50 | | | 83-30-0-491-025-BOE | Tensioner Pressure Tool, For BMW M52, M52TU, M54, M56, S52 service manual reference #11 4 220, Each
Brand: Genuine BMW | $67.00 | | 
TOL-BMW3041 | VANOS Air Compressor Adapter, Applicable: BMW engines - M50, M52, M52TU, M54, M56, M62, Each [Photo] | $22.00 | | 
TOL-BMW3042 | VANOS Cam Sprocket Assembly Jig, Applicable: BMW engines - M52TU, M54, M56, Each [Photo] | $99.50 | | 
TOL-BMW3043 | VANOS Cam Shaft Alignment Jig, Applicable: BMW engines - M52TU, M54, M56, Each [Photo] | $203.00 | | 
TOL-BMW3046 | VANOS Rigid Chain Tensioner, Applicable: BMW engines - M52, M52TU, S52, M54, M56, service manual reference #11 4 220, Each [Photo] | $37.00 | | 
TOL-BMW3047 | VANOS Chain Tensioner Lock Pin, Applicable: BMW engines - M50, M52, Each [Photo] | $8.30 | | 
TOL-BMW3055 | VANOS Cam Timing Master Kit w/ case - 5 Piece, Includes BMW3041, BMW3042, BMW3043, BMW3046, and BMW3047, Each [Photo] | $399.00 | |
| |
|
|
|
