|  | | | BMW E46 Cylinder Head & Valvetrain - Page 3 | Cylinder Head Bolt Sets  | | When doing a rebuild, or replacing the head, You should always replace the bolts holding the head to the block, as they have a tendency to stretch after they are torqued, which can cause numerous problems including blown head gaskets, loss of compression, and possible engine damage if a bolt head breaks off inside the valve train. |
| | Cylinder Head Bolt Set, (14 Bolts Per Set), BMW E46 3 Series, All Except M3 (1999-05), Each | 
11-12-1-740-065-M17 | Cylinder Head Bolt Set, (14 Bolts Per Set), BMW E46 3 Series, All Except M3 (1999-05), Each
Brand: Victor Reinz [Photo] |  |
| $29.75 |  | | 11-12-1-740-065-M61 | Cylinder Head Bolt Set, (14 Bolts Per Set), BMW E46 3 Series, All Except M3 (1999-05), Each
Brand: Meistersatz [Photo] | |
| $26.75 | |
| | 11-12-7-831-862-BOE | Cylinder Head Bolt Set, M3 (2001-05), Each
Brand: Genuine BMW | $52.00 | | Valve Cover Gaskets | | These gaskets should be replaced every time that you adjust your valves. You should also put a little gasket sealer on the inside of the cover where the gasket mounts to the cover. This should prevent the oil leaks that sometimes occur when there isn't a really good seal. |
| | Valve Cover Gasket Set (also use 11-12-1-437-395-M208 valve cover nut seals), E46 323i/Ci/Wagon, 328i/Ci, 330i/Ci/Xi (through 8/02), 330Xi (through 8/02), 325iM54/Xi/CiM54/Ci Convertible (through 8/02), Each | 
11-12-9-070-990-M17 | Valve Cover Gasket Set (also use 11-12-1-437-395-M208 valve cover nut seals), E46 323i/Ci/Wagon, 328i/Ci, 330i/Ci/Xi (through 8/02), 330Xi (through 8/02), 325iM54/Xi/CiM54/Ci Convertible (through 8/02), Each
Brand: Victor Reinz [Photo] | |
| $29.50 | | | 11-12-9-070-990-M30 | Valve Cover Gasket Set (also use 11-12-1-437-395-M208 valve cover nut seals), E46 323i/Ci/Wagon, 328i/Ci, 330i/Ci/Xi (through 8/02), 330Xi (through 8/02), 325iM54/Xi/CiM54/Ci Convertible (through 8/02), Each
Brand: Elring Klinger [Photo] | |
| $26.50 | |
| 
11-12-1-437-395-M208 | Valve Cover Nut Seal (15 per car, sold per each)
Brand: Gloeckler [Photo] | |
| $1.00 | | 
11-12-1-738-607-M9 | Valve Cover Cap Nut, Includes Washer and Seal, As Needed, Each
Brand: Genuine BMW [Photo] | |
| $4.50 | | 
11-12-7-832-034-M17 | Valve Cover Gasket, M3 (2001-05), Each
Brand: Victor Reinz [Photo] | |
| $28.50 | | | Valve Cover Gasket Set | | This set includes the gasket, 6 spark plug hole gaskets, and the two types of valve cover nut seals. |
| | PEL-BMW-M3VC-KIT | Valve Cover Gasket Set, E46 M3 (2001-06) | $65.00 | | Spark Plug Hole Gaskets | 
11-12-7-831-271-M30 | Spark Plug Hole Gasket for Valve Cover (6 per car, sold per each), E46 M3, M3 Convertible; Z3 M Roadster/Coupe S54, Each
Brand: Elring Klinger [Photo] | |
| $2.50 | | Head Gasket Kits | | Here at Pelican we offer head gasket sets for your E46 BMW. Whenever you remove the head, always replace the head gasket and have the head surfaced to ensure proper sealing between the head and the engine block. |
| | Head Gaskets | | Head Gasket, BMW E46 3 Series, All Except M3 (1999-05), Each | 
11-12-7-501-304-M17 | Head Gasket, BMW E46 3 Series, All Except M3 (1999-05), Each
Brand: Victor Reinz [Photo] | |
| $41.25 | | 
11-12-7-501-304-M30 | Head Gasket, BMW E46 3 Series, All Except M3 (1999-05), Each
Brand: Elring Klinger [Photo] | |
| $41.25 | |
| | 11-12-7-832-022-BOE | Head Gasket, M3 (2001-05), Each
Brand: Genuine BMW | $103.00 | | 
11-61-1-436-631-M17 | Gasket Set, for Intake Manifold to Cylinder Head, E46 323i/Ci, 325i/Ci/Xi, 328i/Ci, 330i/Ci/Xi, Each
Brand: Victor Reinz [Photo] | |
| $28.75 | | | Head Gaskets (Oversize) | 
11-12-7-501-305-M30 | Head Gasket +0.3mm (1.00mm), BMW E46 3 Series, All Except M3 (1999-05), Each
Brand: Elring Klinger [Photo] | |
| $89.25 | |
| |
|
|
|
