| BMW E46 Cylinder Head & Valvetrain - Page 1 |
| Need some heads up info on your car? Pelican Parts has all that you need! Proper valve adjustment helps to keep power up (to beat those Mustangs off the line), and also keeps the valve train noise down. Always remember to follow the factory recommendations regarding valve adjustment, otherwise you might end up with a situation like our Pelican tech article, Rendezvous With a Dropped Valve Seat. WARNING, this article is not for the faint of heart! |
|
BMW E46 Crankcase Vent Valve Kits |
Over time, the crankcase ventilation system in your M52/54 equipped BMW is succeptible to condensation. This traps moisture inside the separator, eventually clogging it. This leads to increased oil consumption and smoking. The fix is to replace the oil separator as well as the hoses going to it. Our kit includes everything you need to replace the oil separator in one package. Additionally, you may want to consider upgrading to the cold climate version of the oil separator. This version includes extra insulation around the separator to help prevent condensation inside the separator.
All kits contain the following parts, in addition to those specifically listed in the description:- New Oil Separator
- New ventilation lines
- New silicone hose
|
|
| PEL-CCVV | BMW M52/M54 Crankcase Vent Valve Kit, BMW E46 3 Series, All Except M3 [More Info] | $109.50 |  |
| PEL-CCVVCW | BMW M52/M54 Crankcase Vent Valve Kit (Cold Climate Version), BMW E46 3 Series, All Except M3 [More Info] | $166.25 | |
Intake Valves  |
| A critical part of any head rebuild is new OEM intake valves. Many times valves can be reground and reused, however if your valves are too worn to be re-used, Pelican can supply you with the needed parts for your rebuild. |
|
11-34-1-739-820-M154 | Intake Valve, 323i/Ci/iC (1999-00), 328i/Ci (1999-00), Each
Brand: Intervalves [More Info] |  |
| $10.00 | |
| 11-34-1-739-838-BOE | Intake Valve, +0.2mm Oversize, 323i/Ci/iC (1999-00), 328i/Ci (1999-00), Each
Brand: Intervalves [More Info] | $122.50 | |
11-34-1-438-451-M154 | Intake Valve, 325i/Ci/iC/Xi (2001-05), 330i/Ci/iC/Xi (2001-05), Each
Brand: Intervalves [More Info] | |
| $11.25 | |
| 11-34-7-830-889-BOE | Intake Valve, M3 (2001-06), Each
Brand: Genuine BMW [More Info] | $63.75 | |
Exhaust Valves |
| Anytime you do a head rebuild, it's recommended you replace old exhaust valves with new OEM units. Here at Pelican, we can supply you with the right parts for the job. |
|
11-34-1-739-821-M154 | Exhaust Valve, 323i/Ci/iC (1999-00), 328i/Ci (1999-00), Each
Brand: Intervalves [More Info] | |
| $15.50 | |
11-34-7-505-731-M154 | Exhaust Valve, 325i/Ci/iC/Xi (2001-05), 330i/Ci/iC/Xi (2001-05), Each
Brand: Intervalves [More Info] | |
| $20.00 | |
| 11-34-7-830-888-BOE | Exhaust Valve, M3 (2001-06), Each
Brand: Genuine BMW [More Info] | $63.75 | |
Valve Guides |
| Valve Guides act to provide valves with proper lubrication while your engine is running. Any head rebuild should include new Valve Guides. Whenever you replace the valve guides, be sure to check the size of the original valve guide before ordering. |
|
11-12-1-735-534-M105 | Valve Guide, I.D. 6 mm (12.73 mm), 43 mm Length, E46 3-Series (all except M3), Each
Brand: Canyon [More Info] | |
| $5.00 | |
11-12-1-735-533-M105 | Valve Guide, I.D. 6 mm (12.56 mm) 43 mm in Length, E46 3-Series (all except M3), Each
Brand: Canyon [More Info] | |
| $4.75 | |
Hydraulic Lifters |
| Whenever you replace the camshaft, you should replace the lifters as well. As with any moving part, they wear down, so installing a new camshaft with old lifters can cause premature wear on your camshaft. |
|
11-32-1-748-884-M40 | Hydraulic Valve Lifter, for Intake and Exhaust Valves, BMW E46 3 Series, All Except M3 (1999-05), Each
Brand: INA [More Info] | |
| $18.75 | |
