| BMW E39 Specialty Tools - Page 8 |
Air/Fuel Ratio Meter |
| WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid |
The WEGO IV is a highly accurate and complete air/fuel ratio metering system with built-in data logging. The unit displays air/fuel ratio (AFR) and continuously logs over 2 hours of data, including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure.- Includes Bosch LSU 4.2 oxygen sensor, 96" sensor extension cable, 18 x 1.5 mm weld nut for exhaust pipe, USB cable, and software for downloading and charting
- Data is easily exported to a spreadsheet
- Attractive black anodized aluminum housing with convenient front panel mini USB port, compact size: 3.3"L x 2.1"W x 0.9"H
- RPM input signal connects directly to Porsche tachometer - no adapter required
- Easy free-air calibration for sensor aging effects
- Ultra-bright daylight readable blue LED display and automatic dimming under low light conditions
- 0-5V analog AFR output for interface to dyno instrumentation
- Industrial grade clamping terminal block on rear panel allows easy hookup
Available in either single or dual channel. Dual channel unit displays and logs two channels of AFR data. The 12 foot extension cable is sold separately and is necessary for installation in a rear engine car (two are required for the dual-channel unit). |
|
IG3-114001 | WEGO IV Wide-band AFR Gauge and Data Logger [More Info] | $426.00 |  |
IG3-113001 | WEGO IV Dual Channel Wide-band AFR Gauge and Data Logger [More Info] | $687.50 | |
| IG3-115004 | WEGO 12 Foot Extension Cable [More Info] | $29.50 | |
| Innovate Motorsports LM-2 |
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. - Patented Direct Digital Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
More accessories for your LM-1 available here.
For permanently installed tuning solutions, click here.
Manufacturer: Innovate Motorsports
Click here to visit the manufacturer's home page. |
|
INN-3806 | Innovate Motorsports LM-2: Digital Air/Fuel Ratio Meter [More Info] | $479.00 | |
| Oxygen Sensor Removal Tool |
| Are you having trouble removing the oxygen sensor? Many times, it is not possible to get a wrench or socket around the sensor due to it's location in the exhaust. Once again, Pelican has your answer. This special tool allows you to remove the oxygen sensor using a standard 3/8" drive ratchet, simplifying an otherwise difficult job. |
|
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive, BMW E39 5 Series, All (1996-03) [More Info] | $25.95 | |
New Pig Form-A-Funnel  |
| Straight out of the "Why didn't I think of that?" bin comes the Form-A-Funnel from New Pig. Divert oil around engine parts and right into your drain pan for guaranteed no-mess oil changes! The Form-A-Funnel Draining Tool bends, molds and holds any shape so you can customize the perfect channel to drain liquids without making a mess. The Form-A-Funnel features a thick, pliable nitrile rubber coating that completely encases a thin, bendable layer of aluminum alloy; reshape and reuse thousands of times without fazing it. Highly compatible nitrile rubber ensures safe handling when used with common vehicle liquids and chemicals; works in temperatures from -30°F to 425°F. The Form-A-Funnel cleans easily with a wet rag and is compatible with most cleaners and degreasers. You can even store it flat or roll it up. |
|
PEL-PIG18611 | New Pig Form-A-Funnel, 29" x 5" [More Info] | $34.95 | |
PEL-PIG18714 | New Pig Form-A-Funnel, 22" x 8.6" [More Info] | $34.99 | |
PEL-PIG18609 | New Pig Form-A-Funnel, 14.5" x 6.5" [More Info] | $19.99 | |
PEL-PIG18509 | New Pig Form-A-Funnel, 9" x 4.75" [More Info] | $9.99 | |
Transmission Tools |
| It's a fact. In order to do a job right the first time, you need the correct tools. Here at Pelican we are pleased to offer these specialized tools for the BMW E36 transmission. |
|
| Transmission Bearing Extractors |
| These bearing extractors are used to pull bearings out of the BMW transmission when doing a rebuild. |
|
PEL-TOL-242 | Transmission Bearing Extractor Master Kit (contains all extractors listed below), Each [More Info] | $587.20 | |
| PEL-TOL-242A | Transmission Bearing Extractor, For 44.50 to 41.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242B | Transmission Bearing Extractor, For 37 to 35mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242C | Transmission Bearing Extractor, For 41.50 to 38.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242E | Transmission Bearing Extractor, For 40.50 to 38.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242F | Transmission Bearing Extractor, For 42.50 to 40.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242G | Transmission Bearing Extractor, For 43.50 to 41mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242H | Transmission Bearing Extractor, For 32 to 30mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242I | Transmission Bearing Extractor, For 48 to 45.50mm sized bearings, Each [More Info] | $71.40 | |
