|  | | | BMW E39 Specialty Tools - Page 3 | Engine Tools | | Valve Adjusters | | This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
| 
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [More Info] | $22.50 |  | | Head Bolt Torx Socket Tool | 
83-30-0-490-856-BOE | Torx Socket for Head Bolts, for late BMW 4-valve models (M42, M43, M44, M50, M60, M62, S50, S52) (BMW Service Tool Reference #11-2-250)
Brand: Genuine BMW [More Info] | $64.00 | | | Torque Angle Meter | | For all torque-to-yield fastener applications. Use with 1/2" Drive. Fits models requiring precise torque angle when tightening cylinder head bolts, M10, M20, M21, M30, M40, M41, M42, M43, M44, M50, M52, M54, M57,M60, M62, M70, M73, S14, S38, S50, S52, S62 (BMW Service Tool Reference #00-9-120) |
| 
TOL-LIS28100 | Torque Angle Meter, 1/2" Drive (BMW Service Tool Reference #00-9-120) [More Info] | $37.98 | | | Tappet Depressors | | This tool is used on M engines to preload the cam follower in order to remove/replace valve adjustment shims. |
| 
TOL-3012 | Tappet Depressor, BMW, For All M Models Except European Cars, Each [More Info] | $117.60 | | Cooling System Tools | | You can't do a job right without the correct tools. We here at Pelican are proud to offer these special tools for the BMW cooling system. |
| | Fan Clutch Wrench | | This special wrench is used in conjunction with the counter holder to remove the reverse threaded nut on the fan clutch pulley. |
| 
PEL-TOL-103236T | Fan Clutch Wrench, 32mm x 36mm, BMW All Models, Each (BMW Service Tool Reference #11-5-040) [More Info] | $37.70 | | 
PEL-TOL-1032T | Fan Clutch Long Thin Spanner Wrench (32mm open end, 8mm thickness), BMW All Models, Each (BMW Service Tool Reference #11-5-040) [More Info] | $32.70 | | Counter Holder/Fan Removal Tools | These counter holders are a necessity for removing the water pump from your BMW. They are used to secure the fan hub while you remove the fan clutch pulley nut.
NOTE: The bolts on the water pump are non-symmetric, which means that you need to rotate the fan to find the two that will fit the tool properly. Only one position out of four potential positions will work. |
| 
PEL-TOL-3037 | Counter Holder/Fan Removal Tool, M42 and M60 engines only (BMW Service Tool Reference #11-5-050) [More Info] | $36.10 | | 
83-30-0-491-046-BOE | Counter Holder/Fan Removal Tool, BMW M10, M20, M30, M50, M52, M54, M56 with 32mm Clutch Nut, Each (BMW Service Tool Reference #11-5-030) [More Info] | $39.95 | |
| |
|
|
|
