| BMW E36 Clutch & Flywheel - Page 1 |
| This section contains clutches and related items. If you are looking for that little piece to complete your clutch job, you are in the right place. When doing a clutch job, it's always a good idea to replace the rear end seal on the engine at the same time and also replace the throw-out bearing, flywheel bolts and pilot bearing. You should also replace the clutch release fork and the master/slave cylinders at the same time for added insurance. If you are re-using your flywheel, you should have it re-surfaced so your new clutch seats correctly. |
|
BMW E36 Clutch Super Kits  |
Now available from Pelican is our clutch super kit for the E36 BMW. In this kit, you get everything you need to replace your clutch all at once. If you are spending the time and effort to pull your engine out of your car, you might as well make sure that you are replacing and fixing every piece that might need attention, while you have access to it. Here's what the kit includes:- Three piece clutch kit
- New Pressure plate bolts
- New flywheel bolts
- New crankshaft rear seal (aka flywheel seal)
- New Transmission Main Shaft seal
- New selector rod seal
- New exhaust flange gaskets
- New pilot bearing
- New release bearing spring clip
- New clutch pivot pin
- New slave cylinder
- New slave cylinder hose
If you don't already own one, you will also need the flywheel pilot bearing puller tool for removing the flywheel pilot bearing. You will also need the clutch alignment tool if you don't already own one.
NOTE: Flywheels are not included with these kits. If your old flywheel is worn beyond its re-surfacing limit, it should be replaced with a new one available below. Actual kit contents may differ from representative photograph. |
|
| Clutch Super Kits for cars without Twin Mass Flywheels |
PEL-SKCKE36-01N | Clutch Super Kit, 318i/is/iC (1992-98) For cars without Twin-Mass Flywheel [More Info] | $469.75 |  |
PEL-SKCKE36-03N | Clutch Super Kit, 318ti (1995-99) For cars without Twin-Mass Flywheel [More Info] | $469.75 | |
| Clutch Super Kits for cars with Twin Mass Flywheels |
PEL-SKCKE36-02N | Clutch Super Kit, 318i/is/iC (1992-98) For cars with Twin-Mass Flywheel [More Info] | $411.75 | |
PEL-SKCKE36-04N | Clutch Super Kit, 318ti (1995-99) For cars with Twin-Mass Flywheel [More Info] | $411.75 | |
PEL-SKCKE36-09N | Clutch Super Kit, 323i/is/iC (1996-99) [More Info] | $414.25 | |
PEL-SKCKE36-05N | Clutch Super Kit, 325i/is/iC (1992-95) [More Info] | $435.25 | |
PEL-SKCKE36-06N | Clutch Super Kit, 328i/is/iC (1996-99) [More Info] | $481.50 | |
PEL-SKCKE36-07N | Clutch Super Kit, M3 with 3.0 Engine (1995) [More Info] | $563.25 | |
PEL-SKCKE36-08N | Clutch Super Kit, M3 with 3.2 Engine (1996-99) [More Info] | $576.25 | |
| Clutch Tools |
PEL-TOL-1088 | Pilot Bearing Puller, BMW E36 3 Series, All (1992-99), Each [More Info] | $52.90 | |
Clutch Package - 3 Piece Kit |
| Our 3-piece package includes all original equipment Sachs clutch components. Contains New Pressure Plate, New Clutch Disc, and Throw-out Bearing. Save money over the costs of the individual pieces by purchasing the kit in this convenient three-piece package. |
|
| Clutch Kits for Cars with Twin Mass Flywheels |
21-21-1-223-571-M38 | Clutch Kit for Cars with Twin Mass Flywheel, 318i/is/iC (1992-98), 318ti (1995-99)
Brand: Sachs [More Info] |  |
| $246.75 | |
21-21-1-223-546-M38 | Clutch Kit for Cars with Twin Mass Flywheel, 323i/is/iC (1996-99), 325i/is/iC (1992-95)
Brand: Sachs [More Info] | |
| $272.00 | |
21-21-1-223-602-M38 | Clutch Kit for Cars with Twin Mass Flywheel, 328i/is/iC (1996-99)
Brand: Sachs [More Info] | |
| $306.75 | |
21-21-2-227-536-M38 | Clutch Kit for Cars with Twin Mass Flywheel (also includes the alignment tool and a pilot bearing), M3 with 3.0L engine (1995)
Brand: Sachs [More Info] | |
| $374.75 | |
21-21-2-228-289-M38 | Clutch Kit for Cars with Twin Mass Flywheel, M3 with 3.2L engine (1996-99)
Brand: Sachs [More Info] | |
| $380.25 | |
