| BMW E36 Fuel System - Page 6 |
Oxygen Sensor  |
| The oxygen sensor actively measures the exhaust output from the engine in order to determine the proper mixture for the car. If you are having trouble adjusting the mixture on your car to proper levels, there is a high chance that you may have a faulty oxygen sensor. The oxygen sensor is located before the catalytic converter because the air/fuel mixture ratio cannot be accurately calculated after the exhaust gases have been processed through the CAT. It's also highly recommended that you check out our Pelican Technical Article on Replacing Oxygen Sensors. |
|
11-78-1-468-621-M14 | Oxygen Sensor, 318i/is/iC (through 8/92)
Brand: Bosch [More Info] |  |
| $99.25 |  |
11-78-1-247-235-M14 | Oxygen Sensor, E36 318i/is/iC/ti M42
Brand: Bosch [More Info] | |
| $100.00 | |
11-78-1-247-406-M14 | Oxygen Sensor, 370mm, Mounts Before Catalytic Converters, 1 Per Car, E36 318i/is/iC/ti M44, Each
Brand: Bosch [More Info] | |
| $99.50 | |
11-78-1-739-845-M14 | Oxygen Sensor, 955mm, Mounts After Catalytic Converters, 1 Per Car, E36 318i/is/iC/ti M44 (1 after catalyst), Each
Brand: Bosch [More Info] | |
| $126.75 | |
11-78-1-735-499-M14 | Oxygen Sensor, 420mm (Manual Trans) 325i/is/iC, M3 w/ 3.0L (through 1995)
Brand: Bosch [More Info] | |
| $100.00 | |
11-78-1-735-500-M14 | Oxygen Sensor, 260mm (Auto Trans) 325i/is/iC, M3 w/ 3.0L (through 1995)
Brand: Bosch [More Info] | |
| $100.00 | |
11-78-1-427-884-M209 | Oxygen Sensor, fits on CATALYTIC or on MANIFOLD, 990mm, 323i/is/iC (1998-99), 328i/is/iC (1996-99), M3 w/ 3.2L (1996-99), sold individually. NOTE: Each model-year listed requires varying quantity. Please check your car first before ordering.
Brand: NTK [More Info] | |
| $99.50 | |
Control Valves |
11-72-7-540-466-M244 | Control Valve, for Emission Control, E36 323is/iC, 328i/is/iC, M3 B32
Brand: Pierburg [More Info] | |
| $130.00 | |
11-72-7-505-259-M17 | Gasket, Emission Control Valve, E36 318i/is/iC/ti M44, 323is/iC, 328i/is/iC, M3 B32
Brand: Victor Reinz [More Info] | |
| $4.75 | |
Air/Fuel Ratio Monitors |
The K&N Air/Fuel Monitor is designed to help the performance enthusiast calibrate and fine tune the air/fuel mixture ratio. It is an invaluable diagnostic tool that has a place in everyone's tool box, or you can install it in your car to give you real-time readings. This kit continually monitors an engine's air/fuel ratio while the engine is running. It is extremely sensitive to air/fuel ratio changes and will show them instantly and accurately, within the range of the oxygen sensor.
The instrument works whether the engine is carbureted or fuel injected, normally aspirated, turbocharged, or supercharged, and at any load condition. This precision instrument also works with nitrous oxide, but will not work with diesel or nitro-methane fuels. This kit comes complete with an oxygen sensor that must be installed into the exhaust system by welding. If your BMW is already equipped with an oxygen sensor, an air/fuel monitor may be purchased separately and wired into the existing electrical system. An oxygen sensor is also available separately.
Vehicles with dual exhaust systems can utilize an oxygen sensor in each headpipe or collector that is controlled by a switch that will allow each sensor or bank of cylinders to be read independently. This can show if there is a fuel distribution problem within the intake system, or help to pinpoint a potential problem in advance. |
|
| Air/Fuel Ratio Monitors |
PEL-SW85-2437 | Rectangle Surface Mount Air/Fuel Ratio Monitor Kit, w/oxygen sensor [More Info] | $199.55 | |
PEL-SW85-2439 | Rectangle Surface Mount Air/Fuel Ratio Monitor Kit, without oxygen sensor [More Info] | $137.27 | |
PEL-SW85-2441 | Round In Dash Mount Air/Fuel Ratio Monitor Kit, w/oxygen sensor [More Info] | $206.30 | |
PEL-SW85-2442 | Round, In Dash Mount Air/Fuel Ratio Monitor Kit, without oxygen sensor [More Info] | No Longer Available | |
PEL-SW85-2438 | KN Oxygen Sensor, replacement for air/fuel ratio monitor - single wire (includes weld-on fitting) [More Info] | $82.00 | |
PEL-SW85-2440 | O2 Sensor Plug and Fitting [More Info] | $23.60 | |
| PEL-SW85-21688 | Weld on Fitting [More Info] | $10.50 | |
PEL-SW85-21686 | O2 Sensor Plug, 18mm x 1.5
Brand: K&N [More Info] | $16.15 | |
| O2PLUG-M18-KIT | O2 Sensor Plug, 18mm x 1.5 [More Info] | $5.25 | |
High Pressure Fuel Hose |
| Old, brittle fuel hose is extremely dangerous. Renew your old hoses every couple of years, especially in light of the problems new reformulated gasoline is having with old lines. Priced and sold by the meter. |
|
13-31-1-272-750-M20 | Fuel Hose, 6mm High Pressure, Priced Per Meter, As Needed
Brand: Cohline [More Info] | |
| $6.75 | |
| N-020-281-1-M5021 | Fuel Hose, 7mm High Pressure, Priced Per Meter, As Needed
Brand: Contitech - Porsche [More Info] | |
| $10.75 | |
13-53-7-563-456-M21 | Fuel Hose, 8x13 mm, Priced Per Meter, As Needed
Brand: Contitech [More Info] | |
| $20.25 | |
16-12-1-180-409-M21 | Fuel Hose (8mm ID, 13mm OD) High Pressure, Priced Per Meter, As Needed
Brand: Contitech [More Info] | |
| $9.25 | |
16-12-1-176-440-M21 | Fuel Hose, 12mm High Pressure, Priced Per Meter, As Needed
Brand: Contitech [More Info] | |
| $13.50 | |
