This versatile tool easily locks and holds both camshaft sprockets firmly in place. The two parallel bars "float" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt and chain replacement. Manufacturer: LISLE
Install pistons from 2-7/8" to 4-3/8" (73 to 111mm). Pliers can be used parallel or perpendicular to the cylinder block. Fine-tooth ratcheting lock allows you to compress bands in small increments. Set works by placing a band around the piston, covering the rings and hooking pliers into the band and squeezing. With the band tightly around the piston, insert piston into cylinder and tap lightly with hammer handle to install. Set includes pliers and 6 bands, 1119 through 1124. Manufacturer: KD TOOLS
TOL-KD850
Piston Ring Compressor Set
$62.75
HD Piston Ring Compressor
Use this compressor to install pistons 2-1/8 to 5" (54 to 127mm) in diameter. Positive lock action provides positive compression and fingertip release. To compress piston ring into grooves, slip the tool over the piston and tighten with L-shaped wrench. Insert piston into cylinder and tap with a hammer to install. Enlarged crimped edge prevents compressor from entering the cylinder. Manufacturer: KD TOOLS
TOL-KD2284
HD Piston Ring Compressor
$10.75
Engine Cylinder Glaze Breaker
Controlled pressure assures positive, adjustable contact through full range. Operates with any electric drill. Furnished with 3" long 220 grit stones. adjustable stop collar permits quick selection of two ranges, from 2" to 4" and from 4" to 7". Stone arms easily compress to eliminate cylinder scratches when inserting and removing. Manufacturer: LISLE
TOL-LIS23500
Engine Cylinder Glaze Breaker
$26.75
Engine Cylinder Hone
Hone and remove glaze from engine cylinders from 2" to 7" (51 to 177mm) in diameter. Adjust spring tension for positive cutting action and set diameter with spread limiter. Hone includes medium grit stones No. 240. Manufacturer: KD TOOLS
TOL-KD2833
Engine Cylinder Hone
$24.25
Cylinder Bore Gauge
Quality import at a value price. Features: Self-centering design, 2-6" range, 0.0005 graduations. Comes packaged in a fitted wooden box Manufacturer: STORM BY CENTRAL TOOLS
