| BMW E36 Main Engine Components - Page 5 |
Crankshaft Main Cap Bolts |
| These are the bolts that secure the main caps to the engine block, keeping your crankshaft in place. It's recommended that you replace them when rebuilding your engine. |
|
| Crankshaft Main Cap Bolts |
11-11-1-735-525-M9 | Crankshaft Main Cap Bolt, M10x75, 318i/is/iC/ti (1992-99), 325i/is/iC (1992-95), 323i/is/iC (1996-99), 328i/is/iC (1996-99), M3 With 3.2L Engine (1996-99), As Needed, Each
Brand: Genuine BMW [Photo] |  |
| $1.50 |  |
| 11-11-2-244-286-BOE | Crankshaft Main Cap Bolt, M10x80, M3 With 3.0L Engine (1995), Each
Brand: Genuine BMW | $1.00 | |
Crankcase Ventilation Parts |
11-15-7-501-567-M9 | Crankcase Vent Valve, E36 318i/is/iC (from 9/93), 318ti, Each
Brand: Genuine BMW [Photo] | |
| $59.75 | |
| 11-41-1-715-116-BOE | Gasket for Breather Port Manifold on Lower Chain Case, each, 318i/is w/ M42 motor
Brand: Genuine BMW | $6.00 | |
| 11-41-1-715-264-BOE | Breather Port Manifold on Lower Chain Case, each, 318i/is w/ M42 motor
Brand: Genuine BMW | $17.00 | |
11-15-1-703-484-M9 | Pressure Regulating Valve, E36 323is/iC, 328i/is/iC, M3 B32, Each
Brand: Genuine BMW [Photo] | |
| $80.75 | |
11-15-1-730-507-M21 | Breather Hose at Valve Cover Connector (Large), E36 325i/iC/is, M3 B30, Each
Brand: Contitech [Photo] | |
| $8.25 | |
11-15-1-726-828-M21 | Breather Hose at Valve Cover Connector (Small), E36 325i/iC/is, M3 B30, Each
Brand: Contitech [Photo] | |
| $2.00 | |
11-15-1-703-710-M9 | Breather Hose Connector at Valve Cover, E36 325i/iC/is, M3 B30, Each
Brand: Genuine BMW [Photo] | |
| $5.50 | |
11-15-1-730-724-M17 | O-Ring (18.5 x 3.3) Breather Hose Connector at Valve Cover, E36 325i/iC/is, M3 B30, Each
Brand: Victor Reinz [Photo] | |
| $2.75 | |
| 11-15-1-730-407-BOE | Reducer Elbow for Crankcase Ventilation Hose, 325i/is/iC (1992-95), M3 w/ B30 (1995) | $5.25 | |
11-15-1-703-775-M9 | Ventilation Pipe, Valve Cover to Pressure Regulating Valve, E36 323is/iC, 328i/is/iC, M3 B32, Each
Brand: Genuine BMW [Photo] | |
| $27.25 | |
11-15-1-740-393-M21 | Ventilation Hose, Pressure Regulating Valve to Oil Dip Stick Tube, E36 323is/iC, 328i/is/iC, M3 B32, Each
Brand: Contitech [Photo] | |
| $3.50 | |
13-41-1-733-217-M9 | Grommet for Pressure Regulating Valve, E36 323is/iC, 328i/is/iC, M3 B32, Each
Brand: Genuine BMW [Photo] | |
| $11.00 | |
Engine Seals and Gasket Sets |
| A critical part of any engine rebuild is replacing all gaskets and seals. Trust me on this, do it right the first time. Avoid having to take the whole engine apart again, because you thought that one gasket deep in the engine would be ok. Pelican carries nearly every seal and gasket needed for your E36 engine rebuild. |
|
| Head Gasket Sets |
11-12-9-063-333-M17 | Head Gasket Set, 318i/is/iC With M42 Engine (thru 08/92)
Brand: Victor Reinz [Photo] | |
| $118.00 | |
11-12-9-065-439-M30 | Head Gasket Set, 318i/is/iC With M42 Engine (09/92-12/93)
Brand: Elring Klinger [Photo] | |
| $137.50 | |
11-12-9-066-434-M17 | Head Gasket Set, 318i/is/iC With M42 Engine (01/94-95), 318ti M42
Brand: Victor Reinz [Photo] | |
| $122.50 | |
11-12-9-070-615-M17 | Head Gasket Set, 318i/is/iC With M44 Engine (1995-98), 318ti (1995-99)
Brand: Victor Reinz [Photo] | |
| $163.25 | |
11-12-1-730-253-M17 | Head Gasket Set, 325i/is/iC (thru 08/92)
Brand: Victor Reinz [Photo] | |
| $136.50 | |
11-12-9-064-467-M17 | Head Gasket Set, E36 325i/is/iC (from 9/92)
Brand: Victor Reinz [Photo] | |
| $163.25 | |
11-12-1-427-826-M17 | Head Gasket Set, 323i/is/iC (1996-99), 328i/is/iC (1996-99)
Brand: Victor Reinz [Photo] | |
| $219.75 | |
11-12-9-067-421-M17 | Head Gasket Set, M3 With 3.0L Engine (1995)
Brand: Victor Reinz [Photo] | |
| $236.50 | |
11-12-9-069-861-M17 | Head Gasket Set, M3 With 3.2L Engine (1996-99)
Brand: Victor Reinz [Photo] | |
| $302.00 | |
