|  | | | BMW E36 Cylinder Head & Valvetrain - Page 3 | Cylinder Head Bolt Sets  | | When doing a rebuild, or replacing the head, You should always replace the bolts holding the head to the block, as they have a tendency to stretch after they are torqued, which can cause numerous problems including blown head gaskets, loss of compression, and possible engine damage if a bolt head breaks off inside the valve train. |
| 
11-12-1-721-938-M17 | Cylinder Head Bolt Set, 323i/is/iC (1996-99), 325i/is/iC (1992-95), 328i/is/iC (1996-99), M3 (1995-99)
Brand: Victor Reinz [Photo] [Photo] |  |
| $15.50 |  | 
11-12-1-721-939-M17 | Cylinder Head Bolt Set, 318i/is/iC (1992-98), 318ti (1995-99)
Brand: Victor Reinz [Photo] [Photo] | |
| $14.25 | | Valve Cover Gaskets | | These gaskets should be replaced every time that you adjust your valves. You should also put a little gasket sealer on the inside of the cover where the gasket mounts to the cover. This should prevent the oil leaks that sometimes occur when there isn't a really good seal. |
| 
11-12-1-721-876-M30 | Valve Cover Gasket, Does Not Include Spark Plug Sealing Rings, 318i/is/iC (1992-98), 318ti (1995-99), Each
Brand: Elring Klinger [Photo] | |
| $16.75 | | 
11-12-0-034-106-M61 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (thru 08/92)
Brand: Meistersatz [Photo] | |
| $17.50 | | | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (09/92-95), M3 With 3.0L Engine (1995) | 
11-12-0-034-107-M17 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (09/92-95), M3 With 3.0L Engine (1995)
Brand: Victor Reinz [Photo] | |
| $28.00 | | 
11-12-0-034-107-M30 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (09/92-95), M3 With 3.0L Engine (1995)
Brand: Elring Klinger [Photo] | |
| $24.75 | |
| | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99) | 
11-12-0-034-108-M17 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99)
Brand: Victor Reinz [Photo] | |
| $25.00 | | 
11-12-0-034-108-M58 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99)
Brand: OEM [Photo] | |
| $30.50 | | 
11-12-0-034-108-M30 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99)
Brand: Elring Klinger [Photo] | |
| $23.00 | | | Valve Cover Gasket Kits | 
09-0906-876-M61 | Valve Cover Gasket Set, contains (1) 11-12-1-721-876 Valve Cover Gasket, (1) 11-12-1-721-475 Spark Plug Seal, (3) 11-12-1-721-476 Spark Plug Seal. E36 318i/is/iC/ti
Brand: Meistersatz [Photo] | |
| $23.50 | | | Spark Plug Hole Seals | 
11-12-1-721-475-M16 | Spark Plug Hole Seal, 1 Per Car, With Extra Hole For Valve Cover Mounting Bolt, 318i/is/iC (1992-98), 318ti (1995-99), Each
Brand: Bruss [Photo] | |
| $2.25 | | 
11-12-1-721-476-M16 | Spark Plug Hole Seal, 3 Per Car, 318i/is/iC (1992-98), 318ti (1995-99), Each
Brand: Bruss [Photo] | |
| $1.50 | | | Valve Cover Mounts | 
11-12-1-730-356-M36 | Rubber Mount for Valve Cover, 2 Per Car, 325i/is/iC (1992-95), M3 With 3.0L Engine (1995)
Brand: Metzeler [Photo] | |
| $3.50 | | | Valve Cover Bolt Seal | 
11-12-1-721-879-M17 | Valve Cover Bolt Seal (15 per car, sold per each), E36 318i/is/iC/ti, Each
Brand: Victor Reinz [Photo] | |
| $0.50 | | 
11-12-1-437-395-M208 | Valve Cover Nut Seal (sold per each), 15 Per Car: E36 323is/iC, 325i/is/iC, 328i/is/iC, M3 B30/B32
Brand: Gloeckler [Photo] | |
| $1.00 | | 
11-12-1-738-607-M9 | Valve Cover Cap Nut, Includes Washer and Seal, As Needed, Each
Brand: Genuine BMW [Photo] | |
| $4.50 | |
| |
|
|
|
