|  | | | BMW E36 Cylinder Head & Valvetrain - Page 2 | Valve Springs | | Valve springs are used to provide constant tension on the valves, without them the valves would crash into the tops of the pistons. It's a good idea to have your old valve springs checked by your machine shop for the correct spring tension. If they do not meet the specs, you should replace them with new ones. |
| | 11-34-1-739-472-BOE | Valve Spring, 318i/is/iC With M42 Engine (1992-95), As Needed, Each
Brand: Genuine BMW | $7.75 |  | 
11-34-1-403-709-M9 | Valve Spring, 318i/is/iC With M44 Engine (1995-99) 318ti (1996-99), M3 (1995-99), As Needed, Each
Brand: Genuine BMW [Photo] |  |
| $10.00 | | 
11-34-7-504-268-M9 | Valve Spring, 323i/is/iC (1996-99), 328i/is/iC (1996-99), As Needed, Each
Brand: Genuine BMW [Photo] | |
| $10.50 | | | 11-34-1-738-488-BOE | Valve Spring, 325i/is/iC (09/92-95), As Needed, Each
Brand: Genuine BMW | $7.75 | | | 11-34-1-726-473-BOE | Valve Spring, Inner, 325i/is/iC (thru 09/92), As Needed, Each
Brand: Genuine BMW | $7.75 | | | 11-34-1-730-530-BOE | Valve Spring, Outer, 325i/is/iC (thru 09/92), As Needed, Each
Brand: Genuine BMW | $7.75 | | Valve Keepers | | These small collets are located on the tops of the valves and are used to keep the valve spring assembly from flying off the top of the valve. Generally, they are a pretty robust item, however if you have lost or broken one, we can supply you with new OE BMW parts. |
| 
11-34-1-461-405-M80 | Valve Keeper, 318i/is/iC (1992-99) 318ti (1996-99), 323i/is/iC (1996-99), 325i/is/iC (09/92-95), 328i/is/iC (1996-99), M3 (1995-99), As Needed, Each
Brand: TRW [Photo] | |
| $1.50 | | 
11-34-1-307-136-M80 | Valve Keeper, 325i/is/iC (thru 09/92), As Needed, Each
Brand: TRW [Photo] | |
| $1.00 | | Valve Spring Retaining Plates | | These plates, along with the valve keepers, are used to secure the valve spring in place. |
| 
11-34-1-724-991-M9 | Valve Spring Retaining Plate, Upper, 318i/is/iC With M42 Engine (1992-95), 325i/is/iC (09/92-95), As Needed, Each
Brand: Genuine BMW [Photo] | |
| $5.25 | | | 11-34-1-735-254-BOE | Valve Spring Retaining Plate, Lower, 318i/is/iC With M42 Engine (1992-95), 323i/is/iC (1996-99), 325i/is/iC (09/92-95), 328i/is/iC (1996-99), As Needed, Each
Brand: Genuine BMW | $3.75 | | 
11-34-1-432-453-M9 | Valve Spring Retaining Plate, Upper, 318i/is/iC With M44 Engine (1995-99), 318ti (1996-99), 323i/is/iC (1996-99), 328i/is/iC (1996-99), M3 (1995-99), As Needed, Each
Brand: Genuine BMW [Photo] | |
| $5.25 | | | 11-34-1-403-612-BOE | Valve Spring Retaining Plate, Lower, 318i/is/iC With M44 Engine (1995-99), 318ti (1996-99), M3 (1995-99), As Needed, Each
Brand: Genuine BMW | $3.75 | | | 11-34-1-722-822-BOE | Valve Spring Retaining Plate, Upper, 325i/is/iC (thru 09/92), As Needed, Each
Brand: Genuine BMW | $3.75 | | | 11-34-1-722-544-BOE | Valve Spring Retaining Plate, Lower Inside, 325i/is/iC (thru 09/92), As Needed, Each
Brand: Genuine BMW | $3.75 | | | 11-34-1-726-969-BOE | Valve Spring Retaining Plate, Lower Outside, 325i/is/iC (thru 09/92), As Needed, Each
Brand: Genuine BMW | $3.75 | | Valve Stem Seal Kits | | These are the small seals that control oil flow at the top of the valve stem. Puffs of white smoke that appear from the exhaust when you start the car, then disappear are usually an indication of bad stem seals. |
| 
11-34-9-059-171-M30 | Valve Stem Seal Kit, 2 Kits Per Car, 318i/is/iC (thru 08/92)
Brand: Elring Klinger [Photo] | |
| $6.00 | | 
11-34-9-065-438-M104 | Valve Stem Seal Kit, 318i/is/iC (09/92-98), 318ti (1995-99)
Brand: CFW-Freudenberg [Photo] | |
| $8.75 | | 
11-34-9-064-457-M42 | Valve Stem Seal Kit, 2 kits required per car, 323i/is/iC (1996-99), 325i/is/iC (09/92-95), 328i/is/iC (1996-99), M3 (1995-99)
Brand: Goetze [Photo] | |
| $7.25 | | 
11-34-9-059-172-M30 | Valve Stem Seal Kit, 325i/is/iC (thru 08/92)
Brand: Elring Klinger [Photo] | |
| $9.50 | |
| |
|
|
|
