| BMW E36 Brake Performance Upgrades - Page 2 |
High Performance Drilled/Slotted Brake Rotors |
| Slotted Front Rotors |
| RTR-473-S | BMW Slotted Front Rotor, Left or Right, 318ti (1995-98), Each [More Info] | $182.40 |  |
| RTR-419-S | BMW Slotted Front Rotor, Left or Right, 318i/is/iC (1992-98), Each [More Info] | $233.30 |  |
| Slotted Rear Rotors |
| RTR-420-S | BMW Slotted Rear Rotor, Left or Right, 318i/is/iC (1992-98), Each [More Info] | $202.60 |  |
| RTR-488-S | BMW Slotted Rear Rotor, Left or Right, 328i/is/iC (1996-99), Each [More Info] | $233.30 |  |
| RTR-474-S | BMW Slotted Rear Rotor, Left or Right, 318ti (1995-98), Each [More Info] | No Longer Available | |
TMS Carbon Brake Backing Plates  |
| The TMS carbon brake backing plates are made of pure carbon with Kevlar for reinforcement and high temperature resin. Our unique design specifically for the E36 / E36M3 and Z3 (including MZ3) is optimized for 3” hose and allows the air to flow directly to the rotor with no impedance and weigh a considerable amount less compared to competing products. When flow tested compared to a competitor’s product, the TMS ducts flowed twice as much. This greatly reduces the chance of brake fade, boiling the brake fluid, and wear and tear on your brake components. Our manufacturer is an experienced known composite company that works with many ALMS race teams. Installation is easy as it does not require removal of the wheel bearing. |
|
 PEL-TBR3690212 | TMS Carbon Brake Backing Plate Kit, 325i/is/iC (1992-95), 323i/is/iC (1996-99), 328i/is (1996-99), M3 (1995-99), Z3 All Except 1.9 (1997-02), M Roadster/Coupe (1998-02) [More Info] | $299.50 |  |
TMS Brake Duct Hose Kit  |
| If you are adding fully functional brake ducts to your track or race car, this hose kit is a must. It includes two 4 foot lengths of high-temp duct hose and 4 appropriate sized hose clamps. This is the same duct hose used in Turner Motorsport's championship winning BMW race cars. This is the best suited and highest quality hose for the job. |
|
 PEL-TBR9962303 | TMS Brake Duct Hose Kit [More Info] | $79.00 |  |
Brass Caliper Bushings |
| These brass bushings replace the OE rubber bushings, reducing flex in the calipers, resulting in better contact of the pad against the rotor during hard braking. For performance use only. |
|
 88-5580-038-M230 | Brass Brake Caliper Guide Bushing Set, 1 set per 2 calipers (4 Bushings Per Set), for track/race cars only, BMW E36 3 Series all Brand: Domestic Aftermarket [More Info] |  |
| $46.75 |  |
Brembo Gran Turismo Brake Kits  |
Brembo's performance proven systems result in a substantial improvement in overall braking performance. Key attributes like shorter stopping distances, reduced brake fade, improved pedal feel, and perfect front to rear balance increase safety and build driver confidence.
Brembo's largest multi-piston calipers and 2 piece floating rotors reward even the most demanding driver with “Optimized Brake Balance” and maximum performance. Brembo engineered these systems to be lighter than original equipment brakes to improve steering response and handling characteristics. These traits, combined with increased stopping power and reduced brake fade, deliver truly unmatched performance. The confidence that comes from a Brembo brake upgrade delivers a whole new driving experience.
The Gran Turismo system’s level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers and discs, thermal capacity and brake torque is increased. This potent combination offers the extreme in Brembo’s leading edge technology for high performance street or track use applications.
Brembo Gran Turismo High Performance brake systems include:- Brembo 4 piston calipers with sequentially sized pistons; includes color choices of red, black or silver calipers
- Brembo two piece “floating” hat and rotor assemblies reduce unsprung and rotating weight and dissipate heat faster
- Brembo drilled or slotted two piece rotors up to 15” (380mm)
- DOT and TUV certified Goodridge stainless steel braided brake lines; are guaranteed for life
- Brembo high performance brake pads
- Brembo “floating” anti-rattle rotor hardware
- Brembo billet aluminum brackets with aircraft quality hardware.
Brembo brake systems are fully compatible with ABS and traction control systems. All of the necessary hardware is included to insure seamless installation. For more information about Brembo GT Brake Kits, click here (Adobe Reader required).
NOTE: All kits listed come standard with cross-drilled rotors, however, slotted rotors may be substituted UPON REQUEST ONLY. Caliper colors should also be specified when ordering. Front and rear sets sold separately. |
|
| 1F4-6001A | Brembo GT Brake Kit - Front 320x28mm 1-Piece Drilled rotor - fits under 16 in. wheels or larger BMW E36/E46 (non-M3) 3-Series (1992-05) (Requires minor modification to the OEM steering knuckle) [More Info] | $1695.00 |  |
| 1F1-6001A | Brembo GT Brake Kit - Front 320x28mm 2-Piece rotor - fits under 16 in. wheels or larger BMW E36/E46 (non-M3) 3-Series (1992-05) (Requires minor modification to the OEM steering knuckle) [More Info] | $2595.00 |  |
 1H1-8002A | Brembo GT Brake Kit - Front 355x32mm 2-Piece rotor - fits under 18 in. wheels or larger BMW E36 (non-M3) 3-Series (1992-99) [More Info] | $3295.00 |  |
| 1M1-8006A | Brembo GT Brake Kit - Front 355x32mm 2-Piece rotor - 6-Piston calipers - fits under 18 in. wheels or larger BMW E36 (non-M3) 3-Series (1992-99) [More Info] | $3495.00 |  |
| 1H1-9002A | Brembo GT Brake Kit - Front 380x32mm 2-Piece rotor - fits under 19 in. wheels or larger BMW E36/E46 (non-M3) 3-Series (1992-05) [More Info] | $3595.00 |  |
| 1B1-7004A | Brembo GT Brake Kit - Front 332x32mm 2-Piece rotor - fits under 17 in. wheels or larger BMW E36 M3 (1995-99), (*Requires minor modification to the OEM steering knuckle. **1995 E36 M3 models require minor modification to the lower control arm outboard of the ball joint) [More Info] | $2995.00 |  |
 1B1-8009A | Brembo GT Brake Kit - Front 355x32mm 2-Piece rotor - fits under 18 in. wheels or larger BMW E36 M3 (1995-99), (**1995 E36 M3 models require minor modification to the lower control arm outboard of the ball joint) [More Info] | $3295.00 |  |
| 1M1-8007A | Brembo GT Brake Kit - Front 355x32mm 2-Piece rotor - 6-Piston calipers - fits under 18 in. wheels or larger BMW E36 M3 (1995-99), (**1995 E36 M3 models require minor modification to the lower control arm outboard of the ball joint) [More Info] | $3495.00 |  |
 2E4-4001A | Brembo GT Brake Kit - Rear 294x19mm 1-Piece Drilled rotor, 2-piston calipers - fits under 16 in. wheels or larger BMW E36 (non-M3) 3-Series (1992-99) [More Info] | $1495.00 |  |
| 2C1-6002A | Brembo GT Brake Kit - Rear 328x28mm 2-Piece rotor - fits under 17 in. wheels or larger BMW E36 M3 (1995-99) [More Info] | $2595.00 |  |