| BMW E34 Clutch & Flywheel - Page 2 |
Pressure Plates |
| Pressure Plate Bolts |
07-11-9-919-939-M9 | Pressure Plate Bolt (6 per car, sold individually), BMW E34 5 Series, All Except M5
Brand: Genuine BMW [More Info] |  |
| $1.50 |  |
07-11-9-919-979-M9 | Pressure Plate Bolt (6 per car, sold individually), sold individually, E34 M5 (1991-93)
Brand: Genuine BMW [More Info] | |
| $1.50 | |
Clutch Discs  |
| These Sachs clutch discs are OEM replacements for the original ones shipped with your BMW. It is highly recommended that you have your flywheel re-surfaced whenever you replace the clutch disc. Re-surfacing will prevent abnormal wear and chattering of the clutch disc. |
|
| Clutch Discs |
21-21-1-223-097-M38 | Clutch Disc, 525i (With M20 Engine, 1989-90)
Brand: Sachs [More Info] | |
| $157.75 | |
21-21-1-223-544-BOE | Clutch Disc, 525i Sedan/Touring (With M50 Engine, 1991-95)
Brand: Genuine BMW [More Info] | No Longer Available | |
| 21-21-1-223-166-BOE | Clutch Disc, 535i (1989-92)
Brand: Genuine BMW [More Info] | $204.25 | |
Throw Out Bearings |
| You should always throw out your old throw-out bearing every time that you replace your clutch disc and pressure plate. This bearing is used to directly disengage the clutch disc from the pressure plate when you step on the clutch. A loud squeak when the clutch pedal is pressed in can indicate that there is a problem with your throw-out bearing. |
|
21-51-7-521-471-M38 | Throw Out Bearing, 525i (With M20 Engine)(1989-90), 525i Sedan/Touring (With M50 Engine)(1991-95), 530i Sedan/Touring (1993-95), 535i (1989-92)
Brand: Sachs [More Info] | |
| $40.50 | |
| 21-51-1-223-382-BOE | Throw Out Bearing, 540i (1993-95)
Brand: Genuine BMW [More Info] | $279.00 | |
21-51-2-226-729-M38 | Throw Out Bearing, M5 (1991-93)
Brand: Sachs [More Info] | |
| $40.50 | |
Throw-Out Bearing Guide Tubes |
| This guide tube is used to center the throwout bearing on the transmission input shaft. It's a good idea to replace it during a clutch job if it is worn or the throwout bearing sticks or does not slide smoothly. |
|
23-11-7-510-016-M9 | Throw-Out Bearing Guide Tube, E34 525i M50 (from 7/92)
Brand: Genuine BMW [More Info] | |
| $25.50 | |
Clutch Release Forks and Related Parts |
| It's common to replace your clutch release fork if it shows signs of wear, appears bent or shows cracking under stress. Even the best looking release forks may often fail. If your clutch has had a very 'heavy' feel to it prior to performing your clutch job, then you might have placed a lot of force on the clutch release fork, which has a tendency to weaken it. It's good practice to replace it while you are doing a clutch job as it is a relatively inexpensive part. Also replace the pivot pin at the same time for extra insurance, and do the job right the first time. |
|
| Clutch Release Forks |
| Clutch Release Fork, 525i (With M20 Engine)(1989-90), 535i (1989-92), M5 (1991-93) |
21-51-1-204-229-M9 | Clutch Release Fork, 525i (With M20 Engine)(1989-90), 535i (1989-92), M5 (1991-93)
Brand: Genuine BMW [More Info] | |
| $16.75 | |
21-51-1-204-229-M200 | Clutch Release Fork, 525i (With M20 Engine)(1989-90), 535i (1989-92), M5 (1991-93)
Brand: MTC [More Info] | |
| $10.00 | |
|
21-51-1-223-302-M9 | Clutch Release Fork, 525i Sedan/Touring (With M50 Engine)(1991-95), 530i Sedan/Touring (1993-95), 540i (1993-95)
Brand: Genuine BMW [More Info] | |
| $20.50 | |
| Fork Lever Springs |
21-51-1-204-327-M9 | Fork Lever Spring, 525i (With M20 Engine)(1989-90), 535i (1989-92), M5 (1991-93)
Brand: Genuine BMW [More Info] | |
| $2.50 | |
21-51-7-570-284-M9 | Fork Lever Spring, 525i Sedan/Touring (With M50 Engine)(1991-95), 530i Sedan/Touring (1993-95), 540i (1993-95)
Brand: Genuine BMW [More Info] | |
| $6.50 | |
