| BMW E34 Tools - Page 5 |
Engine Tools |
| Valve Adjusters |
| This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
|
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [More Info] | $22.50 |  |
| Head Bolt Torx Socket Tool |
83-30-0-490-856-BOE | Torx Socket for Head Bolts, for late BMW 4-valve models (M42, M43, M44, M50, M60, M62, S50, S52) (BMW Service Tool Reference #11-2-250)
Brand: Genuine BMW [More Info] | $64.00 | |
| Tappet Depressors |
| This tool is used on M engines to preload the cam follower in order to remove/replace valve adjustment shims. |
|
TOL-3012 | Tappet Depressor, BMW, For All M Models Except European Cars, Each [More Info] | $117.60 | |
Transmission Tools |
| Transmission Bearing Extractors |
| These bearing extractors are used to pull bearings out of the BMW transmission when doing a rebuild. |
|
PEL-TOL-242 | Transmission Bearing Extractor Master Kit (contains all extractors listed below), Each [More Info] | $587.20 | |
| PEL-TOL-242A | Transmission Bearing Extractor, For 44.50 to 41.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242B | Transmission Bearing Extractor, For 37 to 35mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242C | Transmission Bearing Extractor, For 41.50 to 38.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242E | Transmission Bearing Extractor, For 40.50 to 38.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242F | Transmission Bearing Extractor, For 42.50 to 40.50mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242G | Transmission Bearing Extractor, For 43.50 to 41mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242H | Transmission Bearing Extractor, For 32 to 30mm sized bearings, Each [More Info] | $71.40 | |
| PEL-TOL-242I | Transmission Bearing Extractor, For 48 to 45.50mm sized bearings, Each [More Info] | $71.40 | |
| 30mm Flange Nut Socket |
| This special 30mm deep walled socket is used to remove both the drive shaft flange nuts and the pinion drive shaft nuts on the differential. |
|
PEL-TOL-3025 | 30mm Flange Nut Socket, BMW All Models, Each [More Info] | $44.50 | |
| Drain Plug Socket Set |
TOL-BMW3061 | Drain Plug Socket Set of 3, Single Piece Construction, Universal for most BMW applications (Includes 10mm, 14mm, 17mm), Set Note: Please verify size before ordering. [More Info] | $33.95 | |
