|  | | | BMW E34 Tools - Page 3 | BMW Suspension Tools | | Pin Wrench Socket | | This tool is used in order to remove or install the threading ring that secures the front strut into the strut housing. |
| 
PEL-TOL-3014 | Pin Wrench Socket, BMW, All E3, E9, E21, E23, E28, E30, E32 And E34 Models, Each [More Info] | No Longer Available | | | Coil Spring Compressor | | Needed for R&R of coil springs on MacPherson strut type assemblies. This unit incorporates safety retaining pins to completely grab hold of the coils ensuring a No Slip Grip! |
| 
PEL-TOL-MP100 | Coil Spring Compressor, BMW, All Models, Each [More Info] | No Longer Available | | Engine Tools | | Tensioner Pressure Tool | | Use this tool in place of the spring-loaded tensioner when timing the camshafts. It's important to use this tool, and not to rely solely on the spring-loaded tensioner - it does not provide enough tension when the car is sitting to accurate time the camshafts. See how it is used here. |
| 
83-30-0-493-548-BOE | Tensioner Pressure Tool, for VANOS Adjustment, fits BMW S50, M50, M60 and M62 Engines (Including X5 models), BMW Service Tool Reference #11 4 230, Each
Brand: Genuine BMW [More Info] | $38.25 |  | | Cam Timing Master Kit | This kit is exclusively designed to properly Secure and Align the cam and crank shaft during removal and replacement of cylinder head assemblies on BMW V8 engines. This Sir Tools special service tool even comes equipped with the crucial T.D.C. flywheel locking pin needed for setting the crank shaft.
For BMW engines - M60, M62, M62TU. The T.D.C. pin is applicable on BMW engines- M42, M44, M50, M52TU, M60, M62, M62TU. |
| 
TOL-3040 | Cam Timing Master Kit for BMW V8 engines - M60, M62 - BMW3040 Service manual reference# 11 2 440 [More Info] | $415.80 | | | Flywheel Lock | | This is the correct tool used for locking the crankshaft in the TDC position when adjusting or replacing timing components. |
| 
83-30-0-490-861-BOE | Flywheel Lock, For BMW Engines: M42, M44, M50, S50, M52, S52, M54, S54, M60, M62, S62, M70, M73. Service manual reference # 11 2 300 [More Info] | $30.25 | | | Flywheel Lock Down Kit | | This 19-Piece Flywheel lock down tool set is used to secure the crankshaft from rotating. Fits practically any vehicle - completely covers all European Cars! |
| 
SCHW-PTK-19PCS | Flywheel Lock Down Kit, 19-Piece [More Info] | $85.00 | | | Camshaft Holding Tools | | You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
| 
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 | | 
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 | | | Cam Sprocket Turning Spanner | | For turning sprockets when removing & installing VANOS Unit on Single VANOS Engines - M50, M52, S50, S52 - Service manual reference# 11 5 490 |
| 
TOL-3044 | Cam Sprocket Turning Spanner Rotation Tool, Service manual reference# 11 5 490, Applicable: BMW engines - M50, M52, S50US, S52US *Note: This tool only needed for Later Vanos Engines with the Diaphragm Spring located between the Intake Cam stop disks. Not required for Models thru 2/95 [More Info] | $25.20 | |
| |
|
|
|
