|  | | | BMW E34 Engine Tools - Page 2 | Timing Chain Crimping Tools | This tool is used in order to crimp together the master link of your BMW's timing chain.
NOTE: Must be used in conjunction with adapter bit #TOL-M-0050-B (sold separately). |
| 
TOL-M-0050-SIR | Timing Chain Crimping Tool, Adaptor Bit Not Included, All BMW Engines With Timing Chains, Each [More Info] | $158.80 |  | 
TOL-M-0050-B | Timing Chain Crimping Tool Adaptor Bit, For All BMW Timing Chains, Each [More Info] | $43.60 | | Valve Adjusters | | This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
| 
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [More Info] | $22.50 | | Head Bolt Tool | 
83-30-0-490-856-BOE | Torx Socket for Head Bolts, for late BMW 4-valve models (M42, M43, M44, M50, M60, M62, S50, S52) (BMW Service Tool Reference #11-2-250)
Brand: Genuine BMW [More Info] | $55.00 | | | Torque Angle Meter | | For all torque-to-yield fastener applications. Use with 1/2" Drive. Fits models requiring precise torque angle when tightening cylinder head bolts, M10, M20, M21, M30, M40, M41, M42, M43, M44, M50, M52, M54, M57,M60, M62, M70, M73, S14, S38, S50, S52, S62 (BMW Service Tool Reference #00-9-120) |
| 
TOL-LIS28100 | Torque Angle Meter, 1/2" Drive (BMW Service Tool Reference #00-9-120) [More Info] | $37.00 | | Cam Timing Kit | This kit is exclusively designed to properly Secure and Align the cam and crank shaft during removal and replacement of cylinder head assemblies on BMW V8 engines. This Sir Tools special service tool even comes equipped with the crucial T.D.C. flywheel locking pin needed for setting the crank shaft.
For BMW engines - M60, M62, M62TU. The T.D.C. pin is applicable on BMW engines- M42, M44, M50, M52TU, M60, M62, M62TU. |
| 
TOL-3040 | Cam Timing Master Kit for BMW V8 engines - M60, M62 - BMW3040 Service manual reference# 11 2 440 [More Info] | $415.80 | | New Pig Form-A-Funnel  | | Straight out of the "Why didn't I think of that?" bin comes the Form-A-Funnel from New Pig. Divert oil around engine parts and right into your drain pan for guaranteed no-mess oil changes! The Form-A-Funnel Draining Tool bends, molds and holds any shape so you can customize the perfect channel to drain liquids without making a mess. The Form-A-Funnel features a thick, pliable nitrile rubber coating that completely encases a thin, bendable layer of aluminum alloy; reshape and reuse thousands of times without fazing it. Highly compatible nitrile rubber ensures safe handling when used with common vehicle liquids and chemicals; works in temperatures from -30°F to 425°F. The Form-A-Funnel cleans easily with a wet rag and is compatible with most cleaners and degreasers. You can even store it flat or roll it up. |
| 
PEL-PIG18611 | New Pig Form-A-Funnel, 29" x 5" [More Info] | $34.95 | | 
PEL-PIG18714 | New Pig Form-A-Funnel, 22" x 8.6" [More Info] | $34.99 | | 
PEL-PIG18609 | New Pig Form-A-Funnel, 14.5" x 6.5" [More Info] | $19.99 | | 
PEL-PIG18509 | New Pig Form-A-Funnel, 9" x 4.75" [More Info] | $9.99 | |
| |
|
|
|
