| BMW E34 Engine Miscellaneous - Page 2 |
Engine Rebuild Materials |
| JB Weld |
| There are several spots on the case where an original bonding/sealing agent was placed. These are the places where a factory dowel pin or plug has been inserted into the case. JB Weld is an excellent heavy-duty epoxy that can be used to replace the dabs of factory epoxy that help seal some of these areas of the case and chain housings. |
|
PEL-JB8265 | JB Weld [More Info] | $7.87 |  |
| Kimwipes Cleanroom Cloths |
| These are lint-free, dust-free cloths that will not leave any fibers that can clog tiny oil passages. The 911 engine can only be improved by such close attention to cleanliness and detail. Before each part is assembled, wipe it down one last time with isopropyl alcohol to remove any dust or dirt. |
|
PEL-KM34155 | Kimwipes Cleanroom Cloths, 4.5"x8.5", 280 count [More Info] | $8.95 | |
| Gator Skin Mechanics Gloves |
| These all-purpose gloves maintain your natural sense of touch, while keeping your hands clean. They come lightly powdered, one size fits all. Choose between latex and nitrile. Note that nitrile gloves have a greater resistance to chemicals. 50 gloves per box. |
|
CR-23020 | Gator Skin Latex, 50 count [More Info] | $8.35 | |
CR-23029 | Gator Skin Nitrile (Latex free), 50 count [More Info] | $9.90 | |
| Loctite Red 271 |
| The red Loctite compound essentially glues the bolts together, and virtually eliminates the chances of them backing out. Be careful only to use a small bead - too much Loctite on the flywheel bolts can actually prevent them from seating properly. Ironically, this can cause the bolts to fall out later on - exactly what you were trying to prevent by using the Loctite in the first place! |
|
37421-M258 | | $7.50 | |
| Lubro Moly Engine Assembly Lube |
| The Lubro-Moly formulation is a bit thicker than others, which means it's easier to spread, and creates less of a mess. It comes in a 3.5 ounce tube, and one of these should be more than enough for a single 911 engine rebuild. |
|
3010-M19 | Lubro Moly 3010 LM48 Engine Assembly Lube, 50g [More Info] |  |
| $6.50 | |
| Plastigage |
| Plastigage provides a fast and accurate way to check bearing clearances. Plastigage is a special extruded plastic thread of a definite diameter with accurately controlled crush properties. The material is round, smooth and flexible through a wide range of temperatures. Extreme cold will make it somewhat brittle and heat will soften the material. However, Plastigage remains usable and accurate through all normal atmospheric variations of temperature and humidity in work areas where bearing clearances may be checked. |
|
PEL-PLAST-PG1 | Plastigage Green, for clearances 0.001 to 0.003 inches [More Info] | $3.20 | |
Cover Trim Caps |
11-12-1-736-007-M9 | Cover Trim Cap, for Engine Coil Cover, E34 530i, 530i Touring, 540i
Brand: Genuine BMW [More Info] | |
| $2.25 | |
