| BMW E30 Water Pumps & Hoses - Page 3 |
Thermostats and Gaskets |
| Thermostat Gaskets/O-Rings |
| These gaskets are used to seal the thermostat in its housing. Replace these every time you replace the thermostat. |
|
11-53-1-721-218-M213 | O Ring, Thermostat 60x3mm, 318i/is/iC (1991)
Brand: D P H [Photo] |  |
| $0.75 |  |
11-53-1-265-084-M16 | O Ring, Thermostat 60x3.5mm, 325/e/es/i/is/iC/iX (1984-91)
Brand: Bruss [Photo] | |
| $1.00 | |
| Thermostat Housing Gaskets |
| These are the gaskets that seal the thermostat housing to the engine. Be sure to replace this gasket every time you remove the thermostat housing. |
|
11-53-1-721-172-M30 | Gasket, Thermostat Housing, E30 318i M42, 318iC
Brand: Elring Klinger [Photo] | |
| $4.50 | |
11-53-1-722-692-M17 | Gasket, Thermostat Housing, 325/e/es/i/is/iC/iX (1984-91)
Brand: Victor Reinz [Photo] | |
| $1.50 | |
| Thermostat Covers |
| Check this cover for leaks or crack while inspecting your water pump. A more durable aluminum version of this cover is also available at a reasonable cost. |
|
11-53-1-265-059-M9 | Thermostat Cover, E30 325, 325e/es, 325i/is/iC/iX
Brand: Genuine BMW [Photo] | |
| $20.75 | |
| Thermostat Housings and Parts |
| This is the housing that covers the thermostat and secures it to the engine. |
|
11-53-1-730-470-M200 | Thermostat Housing, Aluminum, 325/e/es/i/is/iC/iX (1984-91) **Must use (2) Screw Plugs 07-11-9-919-228 & (2) Gasket Rings 07-11-9-963-200.**
Brand: MTC [Photo] | |
| $33.00 | |
07-11-9-919-228-M9 | Plug for Thermostat Housing **Must use w/Seal Ring 07-11-9-963-200, 325e/es/i/is/iC/iX (1984-91)**
Brand: Genuine BMW [Photo] | |
| $1.25 | |
11-53-1-275-881-M9 | Bleeder Screw in Thermostat Housing, 325/e/es/i/is/iC/iX (1984-91)
Brand: Genuine BMW [Photo] | |
| $5.00 | |
Water Hoses |
| Some of the older E30 BMW's are about 20 years old, and with that there is bound to be some leaking and bursting of older water hoses. Inspect your car's hoses for cracks and leaks on a regular basis. Also, if the hoses get hard and brittle, it is time to replace them. Also examine hoses for blistering or swelling. If you see either, replace the hose. New hoses will be pliable, and should be able to be easily squeezed by your hand. |
|
| Thermostat Hoses (6 Cylinder Cars) |
11-53-1-278-939-M101 | Water Hose, Thermostat to Heater Valve/Outlet, 325/e/es (1984-87)
Brand: Elaplast [Photo] | |
| $10.25 | |
11-53-1-289-377-M101 | Water Hose, Thermostat to Heater Valve/Outlet, 325i/is/iC/iX (1987)
Brand: Elaplast [Photo] | |
| $9.25 | |
13-54-1-705-568-M101 | Water Hose, Thermostat Housing to Throttle Housing, 325/e/es/i/is (thru 08/87)
Brand: Elaplast [Photo] | |
| $6.00 | |
11-53-1-718-982-M101 | Water Hose, Thermostat to Water Pipe, 325/i/is/iC/iX (09/87-91)
Brand: Elaplast [Photo] | |
| $7.75 | |
13-54-1-719-966-M101 | Water Hose, Thermostat Housing to Throttle Housing, 325/e/i/is/iC,iX (09/87-91)
Brand: Elaplast [Photo] | |
| $7.50 | |
