| BMW E30 Cooling System Miscellaneous - Page 2 |
Thermostats and Gaskets |
| Thermostat Gaskets/O-Rings |
| These gaskets are used to seal the thermostat in its housing. Replace these every time you replace the thermostat. |
|
11-53-1-721-218-M213 | O Ring, Thermostat 60x3mm, 318i/is/iC (1991)
Brand: D P H [Photo] |  |
| $0.75 |  |
11-53-1-265-084-M16 | O Ring, Thermostat 60x3.5mm, 325/e/es/i/is/iC/iX (1984-91)
Brand: Bruss [Photo] | |
| $1.00 | |
| Thermostat Housing Gaskets |
| These are the gaskets that seal the thermostat housing to the engine. Be sure to replace this gasket every time you remove the thermostat housing. |
|
11-53-1-721-172-M30 | Gasket, Thermostat Housing, E30 318i M42, 318iC
Brand: Elring Klinger [Photo] | |
| $4.50 | |
11-53-1-722-692-M17 | Gasket, Thermostat Housing, 325/e/es/i/is/iC/iX (1984-91)
Brand: Victor Reinz [Photo] | |
| $1.50 | |
| Thermostat Covers |
| Check this cover for leaks or crack while inspecting your water pump. A more durable aluminum version of this cover is also available at a reasonable cost. |
|
11-53-1-265-059-M9 | Thermostat Cover, E30 325, 325e/es, 325i/is/iC/iX
Brand: Genuine BMW [Photo] | |
| $20.75 | |
| Thermostat Housings and Parts |
| This is the housing that covers the thermostat and secures it to the engine. |
|
11-53-1-730-470-M200 | Thermostat Housing, 325/e/es/i/is/iC/iX (1984-91) **Must use (2) Screw Plugs 07-11-9-919-228 & (2) Gasket Rings 07-11-9-963-200.**
Brand: MTC [Photo] | |
| $33.00 | |
07-11-9-919-228-M9 | Plug for Thermostat Housing **Must use w/Seal Ring 07-11-9-963-200, 325e/es/i/is/iC/iX (1984-91)**
Brand: Genuine BMW [Photo] | |
| $1.25 | |
11-53-1-275-881-M9 | Bleeder Screw in Thermostat Housing, 325/e/es/i/is/iC/iX (1984-91)
Brand: Genuine BMW [Photo] | |
| $5.00 | |
Fans / Fan Clutches / Fan Shrouds |
| An essential part of engine cooling is the fan and shroud. As the engine increases speed, the fan clutch engages and locks the fan into spinning at the same speed as the engine. The resulting airflow from the fan is then channeled by the fan shroud through the radiator, keeping the coolant temperature in the green. If any of these pieces are faulty, you could be jeopardizing the life of your engine. |
|
| Fan Blades |
| 11-52-1-271-846-M400 | Engine Fan, 420mm, 325/e/es/i/is/iC/iX (1984-8/87)
Brand: MTC [Photo] | No Longer Available | |
Heater Control/ Heater Cores / Control Valves / Blower Motors |
| Heating system not quite what you expected? Is your heating system that used to blast out heat like a thermonuclear reactor now just a Siberian winter? Replace your heater core with a new one from Pelican, and keep warm while driving through those Arctic blizzards. |
|
| Heater Valves |
| 64-11-1-386-706-BOE | Heater Valve For Plastic Heater Core (Must use w/O Rings 64-11-1-468-436, 2 Needed), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1987-91), M3 (1987-91)
Brand: Genuine BMW | $169.50 | |
64-11-1-468-530-M9 | Heater Valve For Aluminum Heater Core (Must use w/O Rings 64-11-1-468-436, 3 Needed), 318i (1984-85), 325/e/es/i/is/iC/iX (1987-91), M3 (1987-91)
Brand: Genuine BMW [Photo] | |
| $149.50 | |
