| BMW E30 Clutch & Flywheel - Page 5 |
Flywheels and Related Parts |
| Flywheel Seals |
11-14-2-245-364-M30 | Flywheel Seal, 90 X 110 X 12mm, BMW E30 3 Series, All (1984-92)
Brand: Elring Klinger [Photo] [Photo] |  |
| $10.75 |  |
Flywheel Position Sensors |
| These sensors, mounted off the flywheel, are used to send vital information to the ignition control system, insuring proper operation of the system. |
|
12-14-1-708-618-M14 | Flywheel Position Sensor, 325/e/es (thru 08/85)
Brand: Bosch [Photo] | |
| $89.75 | |
12-14-1-710-668-M85 | Flywheel Position Sensor, 325/e/es (9/85-86), 325i/is/iC/iX (09/87-92)
Brand: Facet [Photo] | |
| $53.00 | |
12-14-1-708-619-M14 | Flywheel Position Sensor, 2 Needed Per Car, M3 (1987-91)
Brand: Bosch [Photo] | |
| $71.25 | |
Brake Fluid  |
| ATE is the best brake fluid in the business. The unique blue color allows you to see when you have finished flushing out your entire system of old brake fluid. |
|
706302-M4 | ATE Super Blue Brake Fluid, 1 Liter
Brand: Ate [Photo] | |
| $16.25 | |
Clutch Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Torx Female Socket Set |
| These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16. |
|
TOL-LIS26750 | Torx Female Socket Set [Photo] | $16.50 | |
| Clutch Wear Gauge |
| This tool allows you to check the thickness of the clutch disc without having to remove the transmission |
|
PEL-TOL-3004 | Clutch Wear Gauge, BMW All Models (1975-on), Each [Photo] | $20.20 | |
| Pilot Bearing Puller |
| Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
|
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [Photo] | $55.00 | |
| Clutch Disc Alignment Tools |
| Needed to properly center the clutch disc when doing a clutch job. |
|
PEL-TOL-CABW | Clutch Disc Alignment Tool, Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [Photo] | $8.45 | |
| PEL-TOL-T183 | Clutch Disc Alignment Tool, Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only | $8.45 | |
