| BMW E30 Transmission - Page 6 |
Transmission Tools |
| Transmission Bearing Extractors |
| These bearing extractors are used to pull bearings out of the BMW transmission when doing a rebuild. |
|
PEL-TOL-242 | Transmission Bearing Extractor Master Kit (contains all extractors listed below), Each [Photo] | $566.10 |  |
| PEL-TOL-242A | Transmission Bearing Extractor, For 44.50 to 41.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242B | Transmission Bearing Extractor, For 37 to 35mm sized bearings, Each | $68.80 | |
| PEL-TOL-242C | Transmission Bearing Extractor, For 41.50 to 38.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242E | Transmission Bearing Extractor, For 40.50 to 38.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242F | Transmission Bearing Extractor, For 42.50 to 40.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242G | Transmission Bearing Extractor, For 43.50 to 41mm sized bearings, Each | $68.80 | |
| PEL-TOL-242H | Transmission Bearing Extractor, For 32 to 30mm sized bearings, Each | $68.80 | |
| PEL-TOL-242I | Transmission Bearing Extractor, For 48 to 45.50mm sized bearings, Each | $68.80 | |
| 30mm Flange Nut Socket |
| This special 30mm deep walled socket is used to remove both the drive shaft flange nuts and the pinion drive shaft nuts on the differential. |
|
PEL-TOL-3025 | 30mm Flange Nut Socket, BMW All Models, Each [Photo] | $40.40 | |
| Transmission Drain Plug Socket |
| This special 17mm ID socket is used to remove the transmission fill and drain plugs. This tool is essential when doing any transmission service. Please be sure to check first if your transmission uses this type of plug before ordering. |
|
PEL-DPR-1017 | Transmission Drain Plug Socket, BMW All Models with 17mm allen plugs, Each [Photo] | $25.00 | |
| Differential Drain Plug Tool |
| This special 10mm Allen wrench is used to remove the differential oil drain plug. |
|
PEL-TOL-3005 | Differential Drain Plug Tool, Fits 10mm Hex Plugs Only, BMW All Models, Each [Photo] | $23.80 | |
| Transmission/Differential Oil Seal Arbors |
| These oil seal arbors are used to properly install the oil seals on the transmission and differential output shafts. |
|
PEL-TOL-3000 | Transmission Oil Seal Arbor For Getrag Transmissions, Check Plate on Transmission for Model Number, All Getrag G242/262/G240 and 260 transmissions, Each 21.00 [Photo] | $16.20 | |
PEL-TOL-3020 | Differential Oil Seal Arbor, BMW All E23, E24, E28, E30 E32 And E34 Models, Each [Photo] | $34.00 | |
