| BMW E30 Specialty Tools - Page 7 |
Transmission Tools |
| Differential Drain Plug Tool |
| This special 10mm Allen wrench is used to remove the differential oil drain plug. |
|
PEL-TOL-3005 | Differential Drain Plug Tool, Fits 10mm Hex Plugs Only, BMW All Models, Each [Photo] | $23.80 |  |
| Transmission/Differential Oil Seal Arbors |
| These oil seal arbors are used to properly install the oil seals on the transmission and differential output shafts. |
|
PEL-TOL-3000 | Transmission Oil Seal Arbor For Getrag Transmissions, Check Plate on Transmission for Model Number, All Getrag G242/262/G240 and 260 transmissions, Each 21.00 [Photo] | $16.20 | |
PEL-TOL-3020 | Differential Oil Seal Arbor, BMW All E23, E24, E28, E30 E32 And E34 Models, Each [Photo] | $34.00 | |
BMW Factory Toolkit |
| 71-11-1-179-629-BOE | Screwdriver from Original Toolkit, E30 3-Series all | $4.75 | |
| 36-13-1-179-325-BOE | Hub Cap Wrench for Cross-Spoke Wheels, E30 3-Series all | $9.00 | |
| 07-11-9-907-950-BOE | Screw for Toolbox Mounting, each, E30 3-Series all
Brand: Genuine BMW | $0.75 | |
| 71-11-1-117-440-BOE | Thumb Screw for Tool Kit, each, E30 3-Series all
Brand: Genuine BMW | $2.25 | |
Jack Stands |
| Never work on your car when it is elevated only by the jack -- very dangerous! Get a set of these jack stands and safely work on your car. |
|
TOL-10498 | Flat Top Jack Stands (set of two) with rubber pad, 6000 pound capacity [Photo] | $139.95 | |
TOL-10497 | Jack Stands (set of two) with standard-style (chassis) top, 6000 pound capacity [Photo] | $129.95 | |
Stud Removal Tools |
| This tool incorporates a collet that latches onto and compresses the threads of the stud, squeezing them tight. Then the tool and the stud can be removed. If you are removing studs from an engine case, an extra vise-grip or two might be useful as well to get more torque on the studs. |
|
| PEL-SNAPON-CG500-2 | Snap-On Stud Remover Collet Tool | $85.75 | |
| PEL-SNAPON-CG500-43 | Snap-On Stud Remover Collet, M10x1.5 | $41.45 | |
| PEL-SNAPON-CG500-37 | Snap-On Stud Remover Collet, M8x1.25 | $41.45 | |
Dremel 83pc Variable Speed Moto-Tool Kit |
Cut, grind, carve, rout, sharpen, drill, polish, or sand. If you can dream it, you can do it with the MultiPro kit. Combining the correct speeds and bits, you can complete all kinds of tasks on a multitude of materials.
• Variable speed, from 5,000 to 35,000 rpm
• Quick-change collet
• Flexible shaft attachment, 75 bits, and two clamps
• 2-year warranty
• The kit includes the MultiPro tool, convenient case with storage compartments, wrench, 75 bits, flex shaft, two clamps, the Dremel chuck, garden tool sharpening attachment, and a book of 175-plus uses for the MultiPro kit.
Manufacturer: DREMEL
Click here to visit the manufacturer's home page |
|
TOL-DRE3956-02 | 83pc Variable Speed Moto-Tool Kit [Photo] | $135.75 | |
