| BMW E30 Specialty Tools - Page 3 |
Engine Tools |
| Oil Seal Arbors |
| This tool is used to properly install the oil seal on the pulley side of the crankshaft on BMW engines. Be sure to order the correct tool for your application |
|
TOL-3018 | Oil Seal Arbor, For BMW M20 Engines, Each [Photo] | No Longer Available | |
TOL-3001 | Oil Seal Arbor Kit, For M10 and M30 Engines, Each [Photo] | No Longer Available | |
| Engine Turning Bars |
| These handy engine turning bars are used to rotate the engine using the timing chain. A great tool to have if you are setting the timing on your car or adjusting the valves. |
|
TOL-3015 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Single Timing Chain, Each [Photo] | $79.30 |  |
| Timing Chain Crimping Tools |
This tool is used in order to crimp together the master link of your BMW's timing chain.
NOTE: Must be used in conjunction with adapter bit #TOL-M-0050-B (sold separately). |
|
TOL-M-0050-SIR | Timing Chain Crimping Tool, Adaptor Bit Not Included, All BMW Engines With Timing Chains, Each [Photo] | $149.00 | |
TOL-M-0050-B | Timing Chain Crimping Tool Adaptor Bit, For All BMW Timing Chains, Each [Photo] | $40.40 | |
| Valve Adjusters |
| This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
|
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [Photo] | $21.60 | |
| Head Bolt Torx Socket Tool |
83-30-0-490-856-BOE | Torx Socket for Head Bolts, for late BMW 4-valve models (M42, M43, M44, M50, M60, M62, S50, S52)
Brand: Genuine BMW [Photo] | $66.75 | |
Oxygen Sensor Removal Tools |
| Ever have trouble getting the O2 Sensor out? Well, no more with these handy tools! |
|
TOL-4491A | 22mm Oxygen Sensor Tube Socket, BMW All Models, Each [Photo] | $38.00 | |
PEL-4491B | 22mm Oxygen Sensor Split Socket, BMW All Models, Each [Photo] | $23.00 | |
Lug Nut Soft Socket |
| This special thin walled, heavy duty IMPACT socket with a riveted Aluminum insert was developed for the crucial task of R&R of wheel lugs nuts/bolts without marring or scuffing the surface of the wheel or bolts. Measuring at 3.5" to fit into deep recess of wide wheels. Comes with a limited life-time warranty, guaranteed to be the last 17mm wheel lug socket you'll ever buy. |
|
PEL-TOL-LUG17MM | Impact Duty Soft-Walled Lug Nut Socket - 17mm [Photo] | $28.30 | |
