Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

 
- Back to Catalog -
Oil Filters and O-Rings
Oil Filters
Oil Filter O-Rings
Oil Filter Housing
Oil Filter Housing Seals
Oil Filler Caps
Engine Oil Drain Plugs / Seals
Oil Drain Plugs
Oil Drain Plug Seals
Engine Oil Pans
Engine Oil Pan Gaskets
Oil Pumps And Related Parts
Oil Pumps
Oil Pump Sprockets
Oil Pump Sprocket Nuts/Washers
Oil Pump Shims
Oil Pump Drive Chains
Oil Coolers
Oil Cooler O-Rings
Oil Cooler Lines
Oil Return Tube Parts
Oil Pressure Switches
Oil Pressure Switches
Oil Level Sensors
Oil Level Sensor Sealing Rings
M3 Oil Temperature Switch
Oil Temperature Switches
FilterMag
Motor Oil & Additives
Lubro Moly Motor Oil
Red Line Synthetic Motor Oil
Lubro Moly Oil Additives and Cleaners
Swepco Motor Oil Additives
Oil System Tools
Super Oil Drain Pan/Storage Container
On/Off Oil Spout
Flex-tube Oil Spout
- Back to Catalog -
Home >  BMW CatalogE30 (1983-1991)Engine >   BMW E30 Oil Circulation  
BMW E30 Oil Circulation - Page 4

Oil Return Tube Parts

11-15-1-280-938-BOE

Oil Return Tube, E30 325/e/es, 325i/is, 325iC/iX, Each
   Brand: Genuine BMW

$8.00

11-15-1-714-390-M16

O-Ring for Oil Return Tube (2 per car, sold per each), E30 325/e/es, 325i/is, 325iC/iX
   Brand: Bruss    [Photo]

$0.50

Oil Pressure Switches

This is the sender for the oil pressure light.
Oil Pressure Switches

12-61-1-277-642-M323

Oil Pressure Switch, 318i (1984-85)
   Brand: FAE    [Photo]

$6.00
Oil Pressure Switch, 318i/is/iC (1991), 325/i/is/iC/iX (09/87-On), M3 (1987-91)

12-61-7-568-480-M64

Oil Pressure Switch, 318i/is/iC (1991), 325/i/is/iC/iX (09/87-On), M3 (1987-91)
   Brand: TRW / Mera  Original Equipment Manufacturer at the time of the vehicle's assembly    [Photo]

$6.75

12-61-7-568-480-M323

Oil Pressure Switch, 318i/is/iC (1991), 325/i/is/iC/iX (09/87-On), M3 (1987-91)
   Brand: FAE    [Photo]

$4.75


61-31-1-354-274-M573

Oil Pressure Switch (Coarse Threads), E30 325/e/es (through 11/86), 325i/is (through 11/86), 325iC/iX (through 11/86)
   Brand: FEP  Original Equipment Manufacturer at the time of the vehicle's assembly    [Photo]

$4.75

Oil Level Sensors

These sensors send impulses to the idiot lights or gauges, informing you of your BMW's oil level.
12-61-1-277-240-BOE

Oil Level Sensor, 325/e/es/i/is/iC (thru 08/87)
   Brand: Genuine BMW

$175.50

12-61-1-722-301-M44

Oil Level Sensor, 325i/is/iC (09/87-On)
   Brand: Hella  Original Equipment Manufacturer at the time of the vehicle's assembly    [Photo]

$130.50
Oil Level Sensor Sealing Rings
Seal Ring for Oil Level Sensor, 325iX (1987-90), M3 (1987-91)

12-61-1-277-129-M17

Seal Ring for Oil Level Sensor, 325iX (1987-90), M3 (1987-91)
   Brand: Victor Reinz    [Photo]

$2.00

12-61-1-277-602-M213

Seal Ring for Oil Level Sensor, 325/e/es/i/is/iC (1984-91)
   Brand: D P H    [Photo]

$2.50


12-61-1-277-129-M17

Seal Ring for Oil Level Sensor, 325iX (1987-90), M3 (1987-91)
   Brand: Victor Reinz    [Photo]

$2.00

M3 Oil Temperature Switch

This switch sends impulses to the oil temperature gauge, informing you of your M3's oil temperature.
Oil Temperature Switches

12-61-1-309-193-M85

Oil Temperature Switch, M3 (1987-91)
   Brand: Facet    [Photo]

$8.75

FilterMag    Camera Pic

Snap one on today! FilterMAG achieves the next evolution in magnetic lubricant filtration. FilterMag's patented technology can withstand the force of oil flow and retains contaminants of all sizes, even smaller than 2 microns. Is 2 microns small? Normal table salt is 100 microns in size.

Your current oil filter can only trap particles that are 25 microns and larger. Every 2 1/2 seconds, one quart of oil flows through an engine's oil filter. Oil filter manufacturers don't want you to know that abrasive wear accounts for about 90% of failures due to contamination and 70% of all engine wear and sludge is caused by contaminants not trapped and held by your typical automotive oil filter.
The patented design of focusing rare earth magnet energy into an oil filter is very much like a laser focuses light. Depending on the filter size and usage FilterMAG focuses from 110 to over 1000 pounds of magnetic energy to the filter.

What is a rare earth magnet? All metallic elements with an atomic number between 57 and 71 are classified as rare earth. These rare earth magnets can produce more than 4,100 surface gauss in a tube magnet circuit compared to 1,000 and 2,000 gauss for standard Alnico and Ceramic magnet. (Gauss is a unit measuring electromagnetic force.) FilterMag's rare earth magnets are generally 5 to 10 times stronger than other magnetic filtration devices using Ceramic magnets. The newest generation of rare earth magnets consists of neodymium iron boron. (Neodymium is number 60 on the periodic table.)

What makes the FilterMAG system work? The FilterMAG's outer cover or flux band insures direct contact with the filter and by placing the magnet segments directly on the flux band, circuits the magnetism to drastically increases the magnetic energy by redirecting the power back into the oil filter and not back into the surrounding air. The heart of FilterMAG patented design system starts with unique precision ground and arced Neodymium magnets aligned in North and South series to generate the greatest amount of force to trap and hold metal particles out of the oil flow.

Just install the reusable FilterMAG on your new oil filter and consider FilterMAG as life insurance for your vehicle.

Industry tests found that removing particles 15 microns in size reduced abrasive wear by 70%. These tests also confirm that removal of particles down to 2 microns virtually stops the abrasion wear cycle. Isn't it time to make your oil filter really work?

BBFM-SS250

FilterMAG, 2.50 to 2.75 inch Filter Size, 110lbs pull force.     [Photo]

$35.75

BBFM-SS300

FilterMAG, 2.90 to 3.40 inch Filter Size, 150lbs pull force.    [Photo]

$47.95

BBFM-SS365

FilterMAG, 3.50 to 3.90 inch Filter Size, 275lbs pull force.     [Photo]

$49.95

BBFM-RA365

FilterMAG, 3.40 to 4.25 inch Filter Size, 525lbs pull force.     [Photo]

$143.92

BBFM-RA450

FilterMAG, 4.25 to 5.50 inch Filter Size, 1,000lbs pull force.     [Photo]

$173.00

  Page 4 of 6  <123456>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.