|  | | | BMW E30 Oil Circulation - Page 1 | | Oil is the lifeblood of your car. It is crucial that the oil system on your BMW is kept up to ensure proper lubrication of engine parts and cooling. It's recommended that you change the oil and filter on your BMW every 3000 miles. Here at Pelican, we can provide you with the parts you need to perform everything from oil changes to installing an external oil cooler. |
| Oil Filters and O-Rings | These kits contain factory OEM filters from either Mahle or Mann, and all needed seals and O-rings to ensure your BMW is getting the best filtration it can. We here at Pelican highly recommend using OEM filters in your BMW whenever possible.
Once you have purchased your new oil filter there are several other oil related products you might like to consider while your working on your oil system. The following are top selling oil related products. The FilterMAG, Synthetic oils, External Oil Cooler Kits, Oil Filter Wrench, Oil Drain Pan to name a few.....Plus don't forget the Drain Plug Sealing Ring. |
| | Oil Filters | 
11-42-1-278-059-M63 | Oil Filter, Spin on Type, 318i (1984-85), Each
Brand: Mann [Photo] |  |
| $6.25 |  | 
11-42-1-727-300-M67 | Oil Filter, Cartridge Type, 318i/is/iC (1991), Each
Brand: Mahle Filter [Photo] | |
| $5.75 | | | Oil Filter, Spin on Type, 325/e/es/i/is/iC/iX (1984-91), Each | 
11-42-1-266-773-M63 | Oil Filter, Spin on Type, 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Mann [Photo] | |
| $5.50 | | | 11-42-1-266-773-M67 | Oil Filter, Spin on Type, 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Mahle Filter [Photo] | |
| $4.25 | |
| | 11-42-1-258-039-M67 | Oil Filter, Spin on Type, M3 (1987-91), Each
Brand: Mahle Filter [Photo] | |
| $4.75 | | | Oil Filter O-Rings | | 11-42-1-711-076-BOE | O Ring for Oil Filter, 318i/is/iC (1991), Each
Brand: Genuine BMW | $0.80 | | | Oil Filter Housing | | 11-42-1-711-070-BOE | Oil Filter Housing, 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Genuine BMW | $201.00 | | | Oil Filter Housing Seals | | 11-42-1-709-513-M17 | O-Ring for Oil Filter Housing (24 x 3 mm) (2 per car, sold per each), E30 318i M42, 318iC
Brand: Victor Reinz [Photo] | |
| $1.00 | | 
07-11-9-963-441-M131 | Seal Ring, for Bolt Holding Oil Filter Housing to Block (A24x32-AL), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Fischer & Plath [Photo] | |
| $0.25 | | 
07-11-9-963-384-M131 | Seal Ring, for Bolt Holding Oil Filter Housing to Block (A24x26-AL), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Fischer & Plath [Photo] | |
| $0.25 | | 
11-42-1-265-670-M16 | O-Ring for Oil Filter Housing to Block (65x3mm), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Bruss [Photo] | |
| $1.25 | | 
11-42-1-714-764-M213 | O-Ring for Oil Filter Housing to Block (20.0x3mm), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: D P H [Photo] | |
| $2.75 | | 
11-42-1-709-800-M17 | Gasket, Oil Filter Housing to Block, E30 318i M42, 318iC, Each
Brand: Victor Reinz [Photo] | |
| $1.50 | | 
11-42-9-059-338-M9 | Seal Kit for Oil Filter Housing, 325/i/is/iC/iX (1987-91), M3 (1987-91), Each
Brand: Genuine BMW [Photo] | |
| $12.50 | | Oil Filler Caps  | | Did you leave the filler cap behind at the gas station when topping up the oil? Is your engine now covered with a nice oily film? It's happened to some of us here at Pelican, too. The good news is that you no longer have to cover the hole with duct tape or plastic bags and rubber bands. We here at Pelican can get you the right part, and keep oil where it belongs, in your engine. |
| 
11-12-1-468-054-M148 | Oil Filler Cap, 318i (1984-85), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91), Each
Brand: Reutter [Photo] [Photo] | |
| $4.50 | | 
11-12-1-743-294-M148 | Oil Filler Cap, 318i/is/iC (1991), Each
Brand: Reutter [Photo] | |
| $5.00 | |
| |
|
|
|
