| BMW E30 Main Engine Components - Page 8 |
Engine Tools |
| Valve Adjusters |
| This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
|
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [Photo] | $21.60 |  |
| Head Bolt Torx Socket Tool |
83-30-0-490-856-BOE | Torx Socket for Head Bolts, for late BMW 4-valve models (M42, M43, M44, M50, M60, M62, S50, S52)
Brand: Genuine BMW [Photo] | $66.75 | |
Engine Rebuild Materials |
| Engine Rebuild Materials Super Kit |
Wondering where to get all of the materials that you need for your engine rebuild? Well, wonder no more - we've assembled it all here in a handy kit. One of our Pelican Rebuild Materials Super Kit will supply you with enough of the sealants, assembly lube, and other special materials that you need to perform one engine rebuild. Here's what's in the kit:- Plastigauge
- JB Weld
- Permatex Anti-Seize Compound
- Lubro-Moly Assembly Lube
- Red Loctite
- Curil-T Sealer
- Loctite Black Silicone
- Loctite 574 Case Sealant
- Disposable Gloves (Latex or Nitrile)
- KimWipe Clean Room Wipes
|
|
| PEL-REBKT-19N | Engine Rebuild Materials Super Kit, with 100 Powder-Free Latex Gloves (large) | $88.70 | |
| PEL-REBKT-18N | Engine Rebuild Materials Super Kit, with 50 non-Latex Nitrile Gloves (one-size) | $91.85 | |
| Engine Rebuild Materials |
| Using the proper materials is vital to leak-free engine. While there are many different combinations of materials that you can use, Wayne recommends the ones listed here. They have proven themselves to be worthy enough to stand the test of time, and provide years of leak-free service. |
|
| Loctite 574 Case Sealant |
| The Loctite 574 sealant is an orange gooey sealant that cures in the absence of air. When you assemble your case and mate the case halves, you will have some squeeze-out that will collect at the case halves. If you leave this excess sealant exposed to the air, you will find that it will not harden. While this may cause you some head scratching, you shouldnt be concerned, as the sealant is designed to seal within tight clearances, and between metal surfaces. Despite the fact that it appears that the Loctite 574 is not curing because the squeeze-out has not hardened, it has in fact properly sealed between your two case halves. |
|
000-043-010-00-M258 | Loctite 574 Case Sealant, 50ml bottle [Photo] |  |
| $23.50 | |
| Liqui Moly Anti-Seize Compound |
Anti-seize compound is used to help prevent galling of steel studs under extreme heat conditions. Studs that are particularly vulnerable to galling are the exhaust and head studs. I recommend using anti-seize on your head studs and exhaust studs during the rebuild process.
It is important to note that Porsche doesnt recommend the use of anti-seize compound on spark plugs, as detailed in Porsche Technical Bulletin 9102, Group 2, identifier 2870. The bulletin applies retroactively to all Porsche models and the theory is that the anti-seize tends to act as an electrical insulator between the plug and the cylinder head. This could have detrimental effect on the firing of the spark due to the loss of a good, consistent ground connection. |
|
2012-M19 | Liqui Moly Anti-seize Compound, 100g [Photo] | |
| $9.00 | |
| Loctite RTV Silicone |
| Black Loctite 598 is an OEM-grade high-temp silicone that is useful for sealing the small o-rings on the case through-bolts. The black color will blend in easily with your case, and will provide added protection against leaks at this interface. Temperature range is -75°F to 625°F (-59°C to 329°C) intermittent. Low odor, non-corrosive, low volatility. Resistant to most chemicals and solvents. Fills gaps to 0.25". |
|
37467-M258 | Loctite RTV Black Silicone 598, 80 ml tube [Photo] | |
| $5.00 | |
| Grey Loctite high-temp silicone is formed in place, allowing it to fill all those little nicks and scratches in mating surfaces once it's cured. Ideal for high-torque applications. Temperature range is -75°F to 625°F (-59°C to 329°C) intermittent. Excellent fluid resistance. Easy to dispense, non-corrosive, low odor, low volatility. |
|
37464-M258 | Loctite RTV Grey Silicone 5699, 80 ml tube [Photo] | |
| $5.25 | |
| Curil-T Sealant |
| Curil-T is a good, thin sealant that I use as an extra precaution against oil leaks when installing some seals. You will want to spread it around on a few of the seals and gaskets during the rebuild process. |
|
PEL-246948 | Curil-T Sealant, 75 ml tube
Brand: Elring Klinger [Photo] | $10.10 | |
