| BMW E30 Main Engine Components - Page 7 |
Piston Pin/Connecting Rod Bushings |
| These bushings are used to support and secure the piston pin inside the piston, and hold it to the connecting rod. Always replace these bushings whenever you are doing a rebuild of your engine. |
|
| Piston Pin/Connecting Rod Bushings |
 11-24-0-618-100-M41 | Piston Pin/Connecting Rod Bushing, 318i (1984-85), As Needed, Each Brand: Glyco [More Info] |  |
| $4.00 |  |
 11-24-1-278-209-M41 | Piston Pin/Connecting Rod Bushing, 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), As Needed, Each Brand: Glyco [More Info] |  |
| $5.00 |  |
Piston Pin Snap Rings  |
| These small snap rings are used to secure the piston pin in place on the connecting rod. Replace them whenever you are rebuilding your engine. It is cheap insurance against massive engine damage. |
|
| Piston Pin Snap Rings |
 07-11-9-934-460-BOE | Piston Pin Snap Ring, BMW E30 3 Series, 318i/is, 325i, 325e, As Needed, Each Brand: Genuine BMW [More Info] | $0.75 |  |
| 11-25-1-310-766-BOE | Piston Pin Snap Ring, BMW E30 3 Series M3, As Needed, Each Brand: Genuine BMW [More Info] | $5.75 |  |
Engine Tools |
| Camshaft Holding Tools |
| You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
|
 TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 |  |
 TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 |  |
| Crank Pulley Securing Tools |
| These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
|
 TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [More Info] | $69.70 |  |
 TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [More Info] | $58.80 |  |
 TOL-3034-3 | Crank Pulley Securing Tool, For BMW M30 Engines, Each [More Info] | $58.80 |  |
 TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [More Info] | $159.60 |  |
| Universal Oil Seal Extractors |
| This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
|
 TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [More Info] | No Longer Available | |
| Oil Seal Arbors |
| This tool is used to properly install the oil seal on the pulley side of the crankshaft on BMW engines. Be sure to order the correct tool for your application |
|
 TOL-3018 | Oil Seal Arbor, For BMW M20 Engines, Each [More Info] | No Longer Available | |
 TOL-3001 | Oil Seal Arbor Kit, For M10 and M30 Engines, Each [More Info] | No Longer Available | |