| BMW E30 Cylinder Head & Valvetrain - Page 8 |
Exhaust Manifold Gaskets |
| These are the various gaskets that seal the BMW exhaust system. Replace them whenever you remove any exhaust components. . Keeping your exhaust components sealed is vital to keep your car running correctly. |
|
| Exhaust Manifold Gaskets |
11-62-1-723-876-M17 | Exhaust Manifold Gasket with Heat Shield for Ignition Cables, 318i (1984-85)
Brand: Victor Reinz [More Info] |  |
| $12.00 |  |
11-62-1-728-489-M17 | Exhaust Manifold Gasket with Heat Shield (2 per car, sold individually), 325/e/es/i/is/iC/iX (from 09/87)
Brand: Victor Reinz [More Info] | |
| $11.50 | |
11-62-1-312-961-M17 | Exhaust Manifold Gasket, M3 (1987-91)
Brand: Victor Reinz [More Info] | |
| $6.75 | |
Intake/Exhaust Studs |
| Did you happen to break that stud off when you were removing the exhaust manifold? Did it pull out of the head when you were taking the nut off? The good news is that we can provide you with original OEM head studs. We at Pelican recommend replacing any head studs that have come loose or pulled out of the head for extra insurance against leaks and other engine damage. |
|
| Intake Port Studs |
07-11-9-908-368-M9 | Intake Port Stud, 8x45mm, 3 Series, All (1984-91), As Needed
Brand: Genuine BMW [More Info] | |
| $1.75 | |
| Exhaust Studs |
11-62-1-711-671-M9 | Exhaust Flange Stud, 10 x 35mm, 3 Series, All (1984-91), As Needed
Brand: Genuine BMW [More Info] | |
| $7.00 | |
11-12-1-312-096-M9 | Exhaust Port Stud (6 x 35 mm), E30 M3, As Needed
Brand: Genuine BMW [More Info] | |
| $6.00 | |
| Exhaust Manifold Nuts |
18-30-1-737-774-M58 | Copper Lock Nut for Exhaust Flange (10mm, verify stud size before ordering), As Needed, Each
Brand: OEM [More Info] | |
| $1.00 | |
11-62-1-304-755-M58 | Copper Lock Nut (6 mm, verify stud size before ordering), Exhaust Manifold to Cylinder Head, E30 M3, Each
Brand: OEM [More Info] | |
| $0.50 | |
11-62-1-711-954-M58 | Copper Lock Nut (8mm, verify stud size before ordering), As Needed, Each
Brand: OEM [More Info] | |
| $0.50 | |
11-72-1-437-202-M58 | Copper Lock Nut (6mm, verify stud size before ordering), 318 M42 (1990-91) Exhaust Manifold to Head, Each
Brand: OEM [More Info] | |
| $1.00 | |
Crankcase Ventilation |
11-15-1-278-804-M101 | Breather Hose, E30 325/e/es (through 8/86), 323i European, Each
Brand: Elaplast [More Info] | |
| $7.50 | |
11-15-1-708-801-M101 | Breather Hose, E30 325/i/is/iX (from 9/86), 325iC, Each
Brand: Elaplast [More Info] | |
| $8.75 | |
11-15-1-310-814-M9 | Breather Hose, from Valve Cover to Oil Separator, E30 M3, Each
Brand: Genuine BMW [More Info] | |
| $29.50 | |
11-15-1-717-858-M101 | Breather Hose, Vent Hose for Valve Cover, E30 318i M42, 318iC, Each
Brand: Elaplast [More Info] | |
| $6.50 | |
| 11-15-1-727-393-BOE | Connector for Breather Hose for Valve Cover, E30 318i/is, Each
Brand: Genuine BMW [More Info] | $5.50 | |
| 11-15-1-284-762-M101 | Breather Hose, from Valve Cover, E30 318i, Each
Brand: Elaplast [More Info] | |
| $6.75 | |
