| BMW E30 Cylinder Head & Valvetrain - Page 7 |
Intake Manifold Gaskets |
| These are the various gaskets that seal the BMW intake system. Replace them whenever you remove any intake components. Good intake gaskets are crucial for proper running of your car. If you have leaks, it can cause the car to run improperly, and possibly cause engine damage. |
|
| Intake Manifold Gaskets |
11-61-1-717-761-M17 | Intake Manifold Gasket, Intake Manifold Top to Intake Manifold Bottom, E30 318i M42
Brand: Victor Reinz [Photo] |  |
| $6.25 |  |
11-61-1-726-010-M17 | Intake Manifold Gasket, (4 Per Car), 325/e/es/i/is/iC/iX (09/87-92)
Brand: Victor Reinz [Photo] | |
| $0.75 | |
11-61-1-726-012-M17 | Intake Manifold Gasket, (1 Per Car), 325/e/es/i/is/iC/iX (09/87-92)
Brand: Victor Reinz [Photo] | |
| $1.50 | |
11-61-1-727-994-M17 | Intake Manifold Gasket, (3 Per Car), 318i (1984-85)
Brand: Victor Reinz [Photo] | |
| $1.75 | |
11-61-1-727-995-M17 | Intake Manifold Gasket, (1 Per Car), 318i (1984-85)
Brand: Victor Reinz [Photo] | |
| $2.00 | |
| 11-61-1-730-743-M17 | Intake Manifold Gasket, (1 Per Car), 325/e/es (thru 08/87)
Brand: Victor Reinz | |
| $3.00 | |
11-61-1-730-787-M17 | Intake Manifold Gasket, 325/e/es (thru 08/87)
Brand: Victor Reinz [Photo] | |
| $1.25 | |
11-61-1-734-684-M17 | Intake Manifold Gasket, Intake Manifold to Cylinder Head (1 Per Car), 318i/is/iC (1991)
Brand: Victor Reinz [Photo] | |
| $4.25 | |
| Cover Plate Gaskets |
11-12-1-306-729-M42 | Gasket, Rear Cover Plate on Cylinder Head, E30 M3, Each
Brand: Goetze [Photo] | |
| $0.75 | |
Exhaust Manifold Gaskets |
| These are the various gaskets that seal the BMW exhaust system. Replace them whenever you remove any exhaust components. . Keeping your exhaust components sealed is vital to keep your car running correctly. |
|
| Exhaust Manifold Gaskets |
11-62-1-723-876-M17 | Exhaust Manifold Gasket with Heat Shield for Ignition Cables, 318i (1984-85)
Brand: Victor Reinz [Photo] | |
| $16.00 | |
11-62-1-728-489-M30 | Exhaust Manifold Gasket with Heat Shield, (2 per car, sold per each), 325/e/es/i/is/iC/iX (from 09/87)
Brand: Elring Klinger [Photo] | |
| $15.25 | |
11-62-1-312-961-M17 | Exhaust Manifold Gasket, M3 (1987-91)
Brand: Victor Reinz [Photo] | |
| $8.00 | |
Intake/Exhaust Studs |
| Did you happen to break that stud off when you were removing the exhaust manifold? Did it pull out of the head when you were taking the nut off? The good news is that we can provide you with original OEM head studs. We at Pelican recommend replacing any head studs that have come loose or pulled out of the head for extra insurance against leaks and other engine damage. |
|
| Intake Port Studs |
07-11-9-908-368-M9 | Intake Port Stud, 8x45mm, 3 Series, All, (1984-91), As Needed
Brand: Genuine BMW [Photo] | |
| $1.00 | |
| Exhaust Studs |
11-62-1-711-671-M9 | Exhaust Flange Stud, 10 x 35mm, 3 Series, All, (1984-91), As Needed
Brand: Genuine BMW [Photo] [Photo] | |
| $4.50 | |
11-12-1-312-096-M9 | Exhaust Port Stud (6 x 35 mm), E30 M3, As Needed
Brand: Genuine BMW [Photo] | |
| $5.25 | |
