| BMW E30 Cylinder Head & Valvetrain - Page 2 |
Valve Springs/Keepers |
| Valve springs and keepers keep valves from smashing into the pistons, causing a horrific mess. Any head rebuild should include new parts. |
|
| Valve Springs |
11-34-9-059-169-M104 | Valve Spring, Inner, 325/e/es (thru 08/85), Each
Brand: CFY-Freudenberg [Photo] |  |
| $5.50 |  |
11-34-1-706-583-M9 | Valve Spring, Outer, 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Genuine BMW [Photo] | |
| $10.50 | |
11-34-1-706-584-M9 | Valve Spring, Inner, 325i/is/iC/iX (1987-91), Each
Brand: Genuine BMW [Photo] | |
| $10.75 | |
| 11-34-1-312-704-BOE | Valve Spring, Inner and Outer, M3 (1987-91), Each
Brand: Genuine BMW | $33.00 | |
| Valve Keepers |
11-34-1-307-136-M80 | Valve Keeper, 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91), Each
Brand: TRW [Photo] | |
| $1.00 | |
11-34-1-710-975-M36 | Valve Keeper, 318i (1984-85), Each
Brand: Febi [Photo] | |
| $1.00 | |
Valve Adjustment Parts |
| Frequent valve adjustments are a critical part of maintaining the life of your engine. It's a good idea to use new parts during a head re-build. |
|
| Valve Adjusting Washer |
11-33-1-258-327-M9 | Valve Adjusting Washer, 318i (1984-85), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Genuine BMW [Photo] | |
| $0.25 | |
| Valve Adjusting Nut |
11-33-1-744-333-M36 | Valve Adjusting Nut, 318i (1984-85), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Febi [Photo] | |
| $0.50 | |
| Valve Adjusting Eccentric |
| These are the small eccentrics that contact the valves, and are turned to adjust the valve clearances. |
|
11-33-1-744-354-M36 | Valve Adjusting Eccentric, 318i (1984-85), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Febi [Photo] | |
| $4.25 | |
| Valve Adjusting Bolt |
| This bolt is used to secure the eccentric and keep it from rotating when the valve clearances have been adjusted. |
|
11-33-1-744-355-M36 | Valve Adjusting Bolt, 318i (1984-85), 325/e/es/i/is/iC/iX (1984-91), Each
Brand: Febi [Photo] | |
| $0.75 | |
